dmesg - Framework 13 7840U Fedora39 Plasma Workstation
Linux version 6.5.6-300.fc39.x86_64 (mockbuild@fe458d2eae0b4ff0bb0a00a41dbf9744) (gcc (GCC) 13.2.1 20230918 (Red Hat 13.2.1-3), GNU ld version 2.40-13.fc39) #1 SMP PREEMPT_DYNAMIC Fri Oct 6 19:57:21 UTC 2023
BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009efff] usable
BIOS-e820: [mem 0x000000000009f000-0x00000000000bffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x0000000009afffff] usable
BIOS-e820: [mem 0x0000000009b00000-0x0000000009dfffff] reserved
BIOS-e820: [mem 0x0000000009e00000-0x0000000009efffff] usable
BIOS-e820: [mem 0x0000000009f00000-0x0000000009f3bfff] ACPI NVS
BIOS-e820: [mem 0x0000000009f3c000-0x000000004235ffff] usable
BIOS-e820: [mem 0x0000000042360000-0x000000004455ffff] reserved
BIOS-e820: [mem 0x0000000044560000-0x0000000044568fff] usable
BIOS-e820: [mem 0x0000000044569000-0x000000004456cfff] reserved
BIOS-e820: [mem 0x000000004456d000-0x000000004456efff] usable
BIOS-e820: [mem 0x000000004456f000-0x000000004456ffff] reserved
BIOS-e820: [mem 0x0000000044570000-0x000000005077efff] usable
BIOS-e820: [mem 0x000000005077f000-0x0000000052f7efff] reserved
BIOS-e820: [mem 0x0000000052f7f000-0x000000005af7efff] ACPI NVS
BIOS-e820: [mem 0x000000005af7f000-0x000000005affefff] ACPI data
BIOS-e820: [mem 0x000000005afff000-0x000000005affffff] usable
BIOS-e820: [mem 0x000000005b000000-0x000000005bffffff] reserved
BIOS-e820: [mem 0x000000005d790000-0x000000005d7effff] reserved
BIOS-e820: [mem 0x000000005d7f5000-0x000000005fffffff] reserved
BIOS-e820: [mem 0x00000000c0300000-0x00000000c03fffff] reserved
BIOS-e820: [mem 0x00000000fed80000-0x00000000fed80fff] reserved
BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000107e2fffff] usable
BIOS-e820: [mem 0x0000001080000000-0x00000010c01fffff] reserved
NX (Execute Disable) protection: active
e820: update [mem 0x4049b018-0x4049f257] usable ==> usable
e820: update [mem 0x4049b018-0x4049f257] usable ==> usable
extended physical RAM map:
reserve setup_data: [mem 0x0000000000000000-0x000000000009efff] usable
reserve setup_data: [mem 0x000000000009f000-0x00000000000bffff] reserved
reserve setup_data: [mem 0x0000000000100000-0x0000000009afffff] usable
reserve setup_data: [mem 0x0000000009b00000-0x0000000009dfffff] reserved
reserve setup_data: [mem 0x0000000009e00000-0x0000000009efffff] usable
reserve setup_data: [mem 0x0000000009f00000-0x0000000009f3bfff] ACPI NVS
reserve setup_data: [mem 0x0000000009f3c000-0x000000004049b017] usable
reserve setup_data: [mem 0x000000004049b018-0x000000004049f257] usable
reserve setup_data: [mem 0x000000004049f258-0x000000004235ffff] usable
reserve setup_data: [mem 0x0000000042360000-0x000000004455ffff] reserved
reserve setup_data: [mem 0x0000000044560000-0x0000000044568fff] usable
reserve setup_data: [mem 0x0000000044569000-0x000000004456cfff] reserved
reserve setup_data: [mem 0x000000004456d000-0x000000004456efff] usable
reserve setup_data: [mem 0x000000004456f000-0x000000004456ffff] reserved
reserve setup_data: [mem 0x0000000044570000-0x000000005077efff] usable
reserve setup_data: [mem 0x000000005077f000-0x0000000052f7efff] reserved
reserve setup_data: [mem 0x0000000052f7f000-0x000000005af7efff] ACPI NVS
reserve setup_data: [mem 0x000000005af7f000-0x000000005affefff] ACPI data
reserve setup_data: [mem 0x000000005afff000-0x000000005affffff] usable
reserve setup_data: [mem 0x000000005b000000-0x000000005bffffff] reserved
reserve setup_data: [mem 0x000000005d790000-0x000000005d7effff] reserved
reserve setup_data: [mem 0x000000005d7f5000-0x000000005fffffff] reserved
reserve setup_data: [mem 0x00000000c0300000-0x00000000c03fffff] reserved
reserve setup_data: [mem 0x00000000fed80000-0x00000000fed80fff] reserved
reserve setup_data: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
reserve setup_data: [mem 0x0000000100000000-0x000000107e2fffff] usable
reserve setup_data: [mem 0x0000001080000000-0x00000010c01fffff] reserved
efi: EFI v2.8 by INSYDE Corp.
efi: ACPI=0x5affe000 ACPI 2.0=0x5affe014 TPMFinalLog=0x5af3f000 SMBIOS=0x51677000 SMBIOS 3.0=0x51674000 MEMATTR=0x4b810018 ESRT=0x4d16b898 MOKvar=0x5187c000 RNG=0x5af9b018 TPMEventLog=0x44570018
random: crng init done
efi: Remove mem61: MMIO range=[0xc0300000-0xc03fffff] (1MB) from e820 map
e820: remove [mem 0xc0300000-0xc03fffff] reserved
efi: Not removing mem62: MMIO range=[0xfed80000-0xfed80fff] (4KB) from e820 map
efi: Remove mem63: MMIO range=[0xff000000-0xffffffff] (16MB) from e820 map
e820: remove [mem 0xff000000-0xffffffff] reserved
efi: Remove mem65: MMIO range=[0x10a0000000-0x10c01fffff] (514MB) from e820 map
e820: remove [mem 0x10a0000000-0x10c01fffff] reserved
secureboot: Secure boot disabled
SMBIOS 3.5.0 present.
DMI: Framework Laptop 13 (AMD Ryzen 7040Series)/FRANMDCP07, BIOS 03.03 10/17/2023
tsc: Fast TSC calibration using PIT
tsc: Detected 3293.905 MHz processor
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
last_pfn = 0x107e300 max_arch_pfn = 0x400000000
MTRR map: 7 entries (3 fixed + 4 variable; max 20), built from 9 variable MTRRs
x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
last_pfn = 0x5b000 max_arch_pfn = 0x400000000
esrt: Reserving ESRT space from 0x000000004d16b898 to 0x000000004d16b8d0.
e820: update [mem 0x4d16b000-0x4d16bfff] usable ==> reserved
Using GB pages for direct mapping
secureboot: Secure boot disabled
RAMDISK: [mem 0x3c3de000-0x3f941fff]
ACPI: Early table checksum verification disabled
ACPI: RSDP 0x000000005AFFE014 000024 (v02 INSYDE)
ACPI: XSDT 0x000000005AF9E228 00017C (v01 INSYDE EDK2 00000002 01000013)
ACPI: FACP 0x000000005AFEE000 00010C (v05 INSYDE EDK2 00000002 ACPI 00040000)
ACPI BIOS Warning (bug): Optional FADT field Pm2ControlBlock has valid Length but zero Address: 0x0000000000000000/0x1 (20230331/tbfadt-615)
ACPI: DSDT 0x000000005AFDE000 0093A6 (v02 INSYDE EDK2 00000002 ACPI 00040000)
ACPI: FACS 0x000000005AEB4000 000040
ACPI: UEFI 0x000000005AF67000 0001CF (v01 INSYDE EDK2 00000001 ACPI 00040000)
ACPI: SSDT 0x000000005AFF4000 008416 (v02 INSYDE EDK2 00000002 ACPI 00040000)
ACPI: SSDT 0x000000005AFF3000 00033E (v01 INSYDE EDK2 00001000 ACPI 00040000)
ACPI: SSDT 0x000000005AFF1000 000ABD (v02 INSYDE EDK2 00001000 ACPI 00040000)
ACPI: ASF! 0x000000005AFF0000 0000A5 (v32 INSYDE EDK2 00000002 ACPI 00040000)
ACPI: BOOT 0x000000005AFEF000 000028 (v01 INSYDE EDK2 00000002 ACPI 00040000)
ACPI: HPET 0x000000005AFED000 000038 (v01 INSYDE EDK2 00000002 ACPI 00040000)
ACPI: APIC 0x000000005AFEC000 000138 (v03 INSYDE EDK2 00000002 ACPI 00040000)
ACPI: MCFG 0x000000005AFEB000 00003C (v01 INSYDE EDK2 00000002 ACPI 00040000)
ACPI: SLIC 0x000000005AFEA000 000176 (v01 INSYDE EDK2 00000002 ACPI 00040000)
ACPI: VFCT 0x000000005AFD9000 004284 (v01 INSYDE EDK2 00000001 ACPI 00040000)
ACPI: SSDT 0x000000005AFD8000 0000F8 (v02 INSYDE EDK2 00001000 ACPI 00040000)
ACPI: SSDT 0x000000005AFD2000 00547E (v02 INSYDE EDK2 00000001 ACPI 00040000)
ACPI: CRAT 0x000000005AFD1000 000F10 (v01 INSYDE EDK2 00000001 ACPI 00040000)
ACPI: CDIT 0x000000005AFD0000 000029 (v01 INSYDE EDK2 00000001 ACPI 00040000)
ACPI: SSDT 0x000000005AFCF000 000F8D (v02 INSYDE EDK2 00000001 ACPI 00040000)
ACPI: SSDT 0x000000005AFCE000 000EC1 (v02 INSYDE EDK2 00000001 ACPI 00040000)
ACPI: SSDT 0x000000005AFFD000 000931 (v02 INSYDE EDK2 00000001 ACPI 00040000)
ACPI: SSDT 0x000000005AFCB000 0013EC (v02 INSYDE EDK2 00000001 ACPI 00040000)
ACPI: SSDT 0x000000005AFCA000 00077A (v02 INSYDE EDK2 00000001 ACPI 00040000)
ACPI: SSDT 0x000000005AFC9000 000737 (v02 INSYDE EDK2 00000001 ACPI 00040000)
ACPI: SSDT 0x000000005AFC7000 0015C8 (v02 INSYDE EDK2 00000001 ACPI 00040000)
ACPI: SSDT 0x000000005AFC4000 002A8F (v02 INSYDE EDK2 00000001 ACPI 00040000)
ACPI: SSDT 0x000000005AFBA000 009821 (v02 INSYDE EDK2 00000001 ACPI 00040000)
ACPI: FPDT 0x000000005AFB9000 000044 (v01 INSYDE EDK2 00000002 ACPI 00040000)
ACPI: BGRT 0x000000005AFB8000 000038 (v01 INSYDE EDK2 00000002 ACPI 00040000)
ACPI: WSMT 0x000000005AFB7000 000028 (v01 INSYDE EDK2 00000001 ACPI 00040000)
ACPI: TPM2 0x000000005AFE9000 000050 (v05 INSYDE EDK2 20505348 ACPI 00040000)
ACPI: MHSP 0x000000005AFE8000 0000C8 (v04 INSYDE EDK2 20505348 ACPI 00040000)
ACPI: SSDT 0x000000005AFB6000 0000E5 (v02 INSYDE EDK2 00000004 ACPI 00040000)
ACPI: IVRS 0x000000005AFB5000 0001A4 (v02 INSYDE EDK2 00000001 ACPI 00040000)
ACPI: SSDT 0x000000005AFB4000 000747 (v02 INSYDE EDK2 00000001 ACPI 00040000)
ACPI: SSDT 0x000000005AFB3000 000C88 (v02 INSYDE EDK2 00000001 ACPI 00040000)
ACPI: SSDT 0x000000005AFB2000 000057 (v02 INSYDE EDK2 00000001 ACPI 00040000)
ACPI: SSDT 0x000000005AFB0000 00170B (v02 INSYDE EDK2 00000001 ACPI 00040000)
ACPI: SSDT 0x000000005AFAF000 000FF7 (v02 INSYDE EDK2 00000001 ACPI 00040000)
ACPI: SSDT 0x000000005AFA5000 0097E3 (v02 INSYDE EDK2 00000001 ACPI 00040000)
ACPI: SSDT 0x000000005AFA0000 004FEB (v02 INSYDE EDK2 00000001 ACPI 00040000)
ACPI: SSDT 0x000000005AF9F000 000C7F (v02 INSYDE EDK2 00000001 ACPI 00040000)
ACPI: SSDT 0x000000005AFCD000 000956 (v02 INSYDE EDK2 00000001 ACPI 00040000)
ACPI: SSDT 0x000000005AF9D000 00008D (v02 INSYDE EDK2 00000001 ACPI 00040000)
ACPI: SSDT 0x000000005AF9C000 000EAD (v02 INSYDE EDK2 00000001 ACPI 00040000)
ACPI: Reserving FACP table memory at [mem 0x5afee000-0x5afee10b]
ACPI: Reserving DSDT table memory at [mem 0x5afde000-0x5afe73a5]
ACPI: Reserving FACS table memory at [mem 0x5aeb4000-0x5aeb403f]
ACPI: Reserving UEFI table memory at [mem 0x5af67000-0x5af671ce]
ACPI: Reserving SSDT table memory at [mem 0x5aff4000-0x5affc415]
ACPI: Reserving SSDT table memory at [mem 0x5aff3000-0x5aff333d]
ACPI: Reserving SSDT table memory at [mem 0x5aff1000-0x5aff1abc]
ACPI: Reserving ASF! table memory at [mem 0x5aff0000-0x5aff00a4]
ACPI: Reserving BOOT table memory at [mem 0x5afef000-0x5afef027]
ACPI: Reserving HPET table memory at [mem 0x5afed000-0x5afed037]
ACPI: Reserving APIC table memory at [mem 0x5afec000-0x5afec137]
ACPI: Reserving MCFG table memory at [mem 0x5afeb000-0x5afeb03b]
ACPI: Reserving SLIC table memory at [mem 0x5afea000-0x5afea175]
ACPI: Reserving VFCT table memory at [mem 0x5afd9000-0x5afdd283]
ACPI: Reserving SSDT table memory at [mem 0x5afd8000-0x5afd80f7]
ACPI: Reserving SSDT table memory at [mem 0x5afd2000-0x5afd747d]
ACPI: Reserving CRAT table memory at [mem 0x5afd1000-0x5afd1f0f]
ACPI: Reserving CDIT table memory at [mem 0x5afd0000-0x5afd0028]
ACPI: Reserving SSDT table memory at [mem 0x5afcf000-0x5afcff8c]
ACPI: Reserving SSDT table memory at [mem 0x5afce000-0x5afceec0]
ACPI: Reserving SSDT table memory at [mem 0x5affd000-0x5affd930]
ACPI: Reserving SSDT table memory at [mem 0x5afcb000-0x5afcc3eb]
ACPI: Reserving SSDT table memory at [mem 0x5afca000-0x5afca779]
ACPI: Reserving SSDT table memory at [mem 0x5afc9000-0x5afc9736]
ACPI: Reserving SSDT table memory at [mem 0x5afc7000-0x5afc85c7]
ACPI: Reserving SSDT table memory at [mem 0x5afc4000-0x5afc6a8e]
ACPI: Reserving SSDT table memory at [mem 0x5afba000-0x5afc3820]
ACPI: Reserving FPDT table memory at [mem 0x5afb9000-0x5afb9043]
ACPI: Reserving BGRT table memory at [mem 0x5afb8000-0x5afb8037]
ACPI: Reserving WSMT table memory at [mem 0x5afb7000-0x5afb7027]
ACPI: Reserving TPM2 table memory at [mem 0x5afe9000-0x5afe904f]
ACPI: Reserving MHSP table memory at [mem 0x5afe8000-0x5afe80c7]
ACPI: Reserving SSDT table memory at [mem 0x5afb6000-0x5afb60e4]
ACPI: Reserving IVRS table memory at [mem 0x5afb5000-0x5afb51a3]
ACPI: Reserving SSDT table memory at [mem 0x5afb4000-0x5afb4746]
ACPI: Reserving SSDT table memory at [mem 0x5afb3000-0x5afb3c87]
ACPI: Reserving SSDT table memory at [mem 0x5afb2000-0x5afb2056]
ACPI: Reserving SSDT table memory at [mem 0x5afb0000-0x5afb170a]
ACPI: Reserving SSDT table memory at [mem 0x5afaf000-0x5afafff6]
ACPI: Reserving SSDT table memory at [mem 0x5afa5000-0x5afae7e2]
ACPI: Reserving SSDT table memory at [mem 0x5afa0000-0x5afa4fea]
ACPI: Reserving SSDT table memory at [mem 0x5af9f000-0x5af9fc7e]
ACPI: Reserving SSDT table memory at [mem 0x5afcd000-0x5afcd955]
ACPI: Reserving SSDT table memory at [mem 0x5af9d000-0x5af9d08c]
ACPI: Reserving SSDT table memory at [mem 0x5af9c000-0x5af9ceac]
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000107e2fffff]
NODE_DATA(0) allocated [mem 0x107e2d5000-0x107e2fffff]
Zone ranges:
DMA [mem 0x0000000000001000-0x0000000000ffffff]
DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
Normal [mem 0x0000000100000000-0x000000107e2fffff]
Device empty
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x0000000000001000-0x000000000009efff]
node 0: [mem 0x0000000000100000-0x0000000009afffff]
node 0: [mem 0x0000000009e00000-0x0000000009efffff]
node 0: [mem 0x0000000009f3c000-0x000000004235ffff]
node 0: [mem 0x0000000044560000-0x0000000044568fff]
node 0: [mem 0x000000004456d000-0x000000004456efff]
node 0: [mem 0x0000000044570000-0x000000005077efff]
node 0: [mem 0x000000005afff000-0x000000005affffff]
node 0: [mem 0x0000000100000000-0x000000107e2fffff]
Initmem setup node 0 [mem 0x0000000000001000-0x000000107e2fffff]
On node 0, zone DMA: 1 pages in unavailable ranges
On node 0, zone DMA: 97 pages in unavailable ranges
On node 0, zone DMA32: 768 pages in unavailable ranges
On node 0, zone DMA32: 60 pages in unavailable ranges
On node 0, zone DMA32: 8704 pages in unavailable ranges
On node 0, zone DMA32: 4 pages in unavailable ranges
On node 0, zone DMA32: 1 pages in unavailable ranges
On node 0, zone DMA32: 43136 pages in unavailable ranges
On node 0, zone Normal: 20480 pages in unavailable ranges
On node 0, zone Normal: 7424 pages in unavailable ranges
ACPI: PM-Timer IO Port: 0x408
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x08] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x09] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x0a] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x0b] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x0c] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x0d] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x0e] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x0f] high edge lint[0x1])
IOAPIC[0]: apic_id 33, version 33, address 0xfec00000, GSI 0-23
IOAPIC[1]: apic_id 34, version 33, address 0xfec01000, GSI 24-55
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
ACPI: Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x10228210 base: 0xfed00000
e820: update [mem 0x4b833000-0x4b881fff] usable ==> reserved
smpboot: Allowing 16 CPUs, 0 hotplug CPUs
PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff]
PM: hibernation: Registered nosave memory: [mem 0x0009f000-0x000bffff]
PM: hibernation: Registered nosave memory: [mem 0x000c0000-0x000fffff]
PM: hibernation: Registered nosave memory: [mem 0x09b00000-0x09dfffff]
PM: hibernation: Registered nosave memory: [mem 0x09f00000-0x09f3bfff]
PM: hibernation: Registered nosave memory: [mem 0x4049b000-0x4049bfff]
PM: hibernation: Registered nosave memory: [mem 0x4049f000-0x4049ffff]
PM: hibernation: Registered nosave memory: [mem 0x42360000-0x4455ffff]
PM: hibernation: Registered nosave memory: [mem 0x44569000-0x4456cfff]
PM: hibernation: Registered nosave memory: [mem 0x4456f000-0x4456ffff]
PM: hibernation: Registered nosave memory: [mem 0x4b833000-0x4b881fff]
PM: hibernation: Registered nosave memory: [mem 0x4d16b000-0x4d16bfff]
PM: hibernation: Registered nosave memory: [mem 0x5077f000-0x52f7efff]
PM: hibernation: Registered nosave memory: [mem 0x52f7f000-0x5af7efff]
PM: hibernation: Registered nosave memory: [mem 0x5af7f000-0x5affefff]
PM: hibernation: Registered nosave memory: [mem 0x5b000000-0x5bffffff]
PM: hibernation: Registered nosave memory: [mem 0x5c000000-0x5d78ffff]
PM: hibernation: Registered nosave memory: [mem 0x5d790000-0x5d7effff]
PM: hibernation: Registered nosave memory: [mem 0x5d7f0000-0x5d7f4fff]
PM: hibernation: Registered nosave memory: [mem 0x5d7f5000-0x5fffffff]
PM: hibernation: Registered nosave memory: [mem 0x60000000-0xfed7ffff]
PM: hibernation: Registered nosave memory: [mem 0xfed80000-0xfed80fff]
PM: hibernation: Registered nosave memory: [mem 0xfed81000-0xffffffff]
[mem 0x60000000-0xfed7ffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns
setup_percpu: NR_CPUS:8192 nr_cpumask_bits:16 nr_cpu_ids:16 nr_node_ids:1
percpu: Embedded 64 pages/cpu s225280 r8192 d28672 u262144
pcpu-alloc: s225280 r8192 d28672 u262144 alloc=1*2097152
pcpu-alloc: [0] 00 01 02 03 04 05 06 07 [0] 08 09 10 11 12 13 14 15
Unknown kernel command line parameters "rhgb BOOT_IMAGE=(hd0,gpt2)/vmlinuz-6.5.6-300.fc39.x86_64", will be passed to user space.
Dentry cache hash table entries: 8388608 (order: 14, 67108864 bytes, linear)
Inode-cache hash table entries: 4194304 (order: 13, 33554432 bytes, linear)
Fallback order for Node 0: 0
Built 1 zonelists, mobility grouping on. Total pages: 16306474
Policy zone: Normal
mem auto-init: stack:all(zero), heap alloc:off, heap free:off
software IO TLB: area num 16.
Memory: 64821616K/66261876K available (18432K kernel code, 3276K rwdata, 14436K rodata, 4508K init, 17396K bss, 1440000K reserved, 0K cma-reserved)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=16, Nodes=1
ftrace: allocating 53440 entries in 209 pages
ftrace: allocated 209 pages with 4 groups
Dynamic Preempt: voluntary
rcu: Preemptible hierarchical RCU implementation.
rcu: RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=16.
Trampoline variant of Tasks RCU enabled.
Rude variant of Tasks RCU enabled.
Tracing variant of Tasks RCU enabled.
rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies.
rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=16
NR_IRQS: 524544, nr_irqs: 1096, preallocated irqs: 16
rcu: srcu_init: Setting srcu_struct sizes based on contention.
kfence: initialized - using 2097152 bytes for 255 objects at 0x(____ptrval____)-0x(____ptrval____)
Console: colour dummy device 80x25
printk: console [tty0] enabled
ACPI: Core revision 20230331
clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484873504 ns
APIC: Switch to symmetric I/O mode setup
AMD-Vi: ivrs, add hid:AMDI0020, uid:\_SB.FUR0, rdevid:160
AMD-Vi: ivrs, add hid:AMDI0020, uid:\_SB.FUR1, rdevid:160
AMD-Vi: ivrs, add hid:AMDI0020, uid:\_SB.FUR2, rdevid:160
AMD-Vi: ivrs, add hid:AMDI0020, uid:\_SB.FUR3, rdevid:160
AMD-Vi: Using global IVHD EFR:0x246577efa2254afa, EFR2:0x0
x2apic: IRQ remapping doesn't support X2APIC mode
Switched APIC routing to physical flat.
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x2f7aceb384a, max_idle_ns: 440795258191 ns
Calibrating delay loop (skipped), value calculated using timer frequency.. 6587.81 BogoMIPS (lpj=3293905)
x86/cpu: User Mode Instruction Prevention (UMIP) activated
LVT offset 1 assigned for vector 0xf9
LVT offset 2 assigned for vector 0xf4
process: using mwait in idle threads
Last level iTLB entries: 4KB 512, 2MB 512, 4MB 256
Last level dTLB entries: 4KB 2048, 2MB 2048, 4MB 1024, 1GB 0
Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
Spectre V2 : Mitigation: Enhanced / Automatic IBRS
Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier
Spectre V2 : User space: Mitigation: STIBP always-on protection
Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl
Speculative Return Stack Overflow: IBPB-extending microcode not applied!
Speculative Return Stack Overflow: WARNING: See for mitigation options.
Speculative Return Stack Overflow: Mitigation: safe RET, no microcode
x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
x86/fpu: Supporting XSAVE feature 0x020: 'AVX-512 opmask'
x86/fpu: Supporting XSAVE feature 0x040: 'AVX-512 Hi256'
x86/fpu: Supporting XSAVE feature 0x080: 'AVX-512 ZMM_Hi256'
x86/fpu: Supporting XSAVE feature 0x200: 'Protection Keys User registers'
x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
x86/fpu: xstate_offset[5]: 832, xstate_sizes[5]: 64
x86/fpu: xstate_offset[6]: 896, xstate_sizes[6]: 512
x86/fpu: xstate_offset[7]: 1408, xstate_sizes[7]: 1024
x86/fpu: xstate_offset[9]: 2432, xstate_sizes[9]: 8
x86/fpu: Enabled xstate features 0x2e7, context size is 2440 bytes, using 'compacted' format.
Freeing SMP alternatives memory: 48K
pid_max: default: 32768 minimum: 301
LSM: initializing lsm=lockdown,capability,yama,selinux,bpf,landlock,integrity
Yama: becoming mindful.
SELinux: Initializing.
LSM support for eBPF active
landlock: Up and running.
Mount-cache hash table entries: 131072 (order: 8, 1048576 bytes, linear)
Mountpoint-cache hash table entries: 131072 (order: 8, 1048576 bytes, linear)
smpboot: CPU0: AMD Ryzen 7 7840U w/ Radeon 780M Graphics (family: 0x19, model: 0x74, stepping: 0x1)
RCU Tasks: Setting shift to 4 and lim to 1 rcu_task_cb_adjust=1.
RCU Tasks Rude: Setting shift to 4 and lim to 1 rcu_task_cb_adjust=1.
RCU Tasks Trace: Setting shift to 4 and lim to 1 rcu_task_cb_adjust=1.
Performance Events: Fam17h+ 16-deep LBR, core perfctr, AMD PMU driver.
... version: 2
... bit width: 48
... generic registers: 6
... value mask: 0000ffffffffffff
... max period: 00007fffffffffff
... fixed-purpose events: 0
... event mask: 000000000000003f
signal: max sigframe size: 3376
rcu: Hierarchical SRCU implementation.
rcu: Max phase no-delay instances is 400.
NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
smp: Bringing up secondary CPUs ...
smpboot: x86: Booting SMP configuration:
.... node #0, CPUs: #2 #4 #6 #8 #10 #12 #14 #1 #3 #5 #7 #9 #11 #13 #15
Spectre V2 : Update user space SMT mitigation: STIBP always-on
smp: Brought up 1 node, 16 CPUs
smpboot: Max logical packages: 1
smpboot: Total of 16 processors activated (105404.96 BogoMIPS)
devtmpfs: initialized
x86/mm: Memory block size: 2048MB
ACPI: PM: Registering ACPI NVS region [mem 0x09f00000-0x09f3bfff] (245760 bytes)
ACPI: PM: Registering ACPI NVS region [mem 0x52f7f000-0x5af7efff] (134217728 bytes)
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
futex hash table entries: 4096 (order: 6, 262144 bytes, linear)
pinctrl core: initialized pinctrl subsystem
PM: RTC time: 05:58:46, date: 2023-11-02
NET: Registered PF_NETLINK/PF_ROUTE protocol family
DMA: preallocated 4096 KiB GFP_KERNEL pool for atomic allocations
DMA: preallocated 4096 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
DMA: preallocated 4096 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
audit: initializing netlink subsys (disabled)
audit: type=2000 audit(1698904726.156:1): state=initialized audit_enabled=0 res=1
thermal_sys: Registered thermal governor 'fair_share'
thermal_sys: Registered thermal governor 'bang_bang'
thermal_sys: Registered thermal governor 'step_wise'
thermal_sys: Registered thermal governor 'user_space'
cpuidle: using governor menu
Simple Boot Flag at 0x44 set to 0x80
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: not using MMCONFIG
PCI: Using configuration type 1 for base access
PCI: Using configuration type 1 for extended access
kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible.
HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages
HugeTLB: 16380 KiB vmemmap can be freed for a 1.00 GiB page
HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages
HugeTLB: 28 KiB vmemmap can be freed for a 2.00 MiB page
cryptd: max_cpu_qlen set to 1000
raid6: skipped pq benchmark and selected avx512x4
raid6: using avx512x2 recovery algorithm
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: 27 ACPI AML tables successfully acquired and loaded
ACPI: USB4 _OSC: OS supports USB3+ DisplayPort+ PCIe+ XDomain+
ACPI: USB4 _OSC: OS controls USB3+ DisplayPort+ PCIe+ XDomain+
ACPI: EC: EC started
ACPI: EC: interrupt blocked
ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62
ACPI: \_SB_.PCI0.LPC0.EC0_: Boot DSDT EC used to handle transactions
ACPI: Interpreter enabled
ACPI: PM: (supports S0 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[Firmware Info]: PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] not reserved in ACPI motherboard resources
PCI: not using MMCONFIG
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
PCI: Ignoring E820 reservations for host bridge windows
ACPI: Enabled 3 GPEs in block 00 to 1F
ACPI: \_SB_.PCI0.GPP8.P0NV: New power resource
ACPI: \_SB_.PCI0.GP11.PWRS: New power resource
ACPI: \_SB_.PCI0.GP11.SWUS.PWRS: New power resource
ACPI: \_SB_.PCI0.GP12.PWRS: New power resource
ACPI: \_SB_.PCI0.GP12.SWUS.PWRS: New power resource
ACPI: \_SB_.PCI0.GP17.PWRS: New power resource
ACPI: \_SB_.PCI0.GP17.VGA_.PWRS: New power resource
ACPI: \_SB_.PCI0.GP17.ACP_.PWRS: New power resource
ACPI: \_SB_.PCI0.GP17.AZAL.PWRS: New power resource
ACPI: \_SB_.PCI0.GP17.HDAU.PWRS: New power resource
ACPI: \_SB_.PCI0.GP17.XHC0.PWRS: New power resource
ACPI: \_SB_.PCI0.GP17.XHC1.PWRS: New power resource
ACPI: \_SB_.PCI0.GP19.XHC2.PWRS: New power resource
ACPI: \_SB_.PCI0.GP19.NHI0.PWRS: New power resource
ACPI: \_SB_.PCI0.GP19.XHC3.PWRS: New power resource
ACPI: \_SB_.PCI0.GP19.NHI1.PWRS: New power resource
ACPI: \_SB_.PCI0.GP19.XHC4.PWRS: New power resource
ACPI: \_SB_.PRWL: New power resource
ACPI: \_SB_.PRWB: New power resource
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI EDR HPX-Type3]
acpi PNP0A08:00: _OSC: platform does not support [SHPCHotplug AER]
acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME PCIeCapability LTR DPC]
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000cffff window]
pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000effff window]
pci_bus 0000:00: root bus resource [mem 0x60000000-0x90bfffff window]
pci_bus 0000:00: root bus resource [mem 0xf0000000-0xfec00000 window]
pci_bus 0000:00: root bus resource [mem 0xfed45000-0xfed814ff window]
pci_bus 0000:00: root bus resource [mem 0xfed81900-0xfed81fff window]
pci_bus 0000:00: root bus resource [mem 0xfedc0000-0xfedc0fff window]
pci_bus 0000:00: root bus resource [mem 0xfedc6000-0xfedc6fff window]
pci_bus 0000:00: root bus resource [mem 0x10c0200000-0x891fffffff window]
pci_bus 0000:00: root bus resource [bus 00-ff]
pci 0000:00:00.0: [1022:14e8] type 00 class 0x060000
pci 0000:00:00.2: [1022:14e9] type 00 class 0x080600
pci 0000:00:01.0: [1022:14ea] type 00 class 0x060000
pci 0000:00:02.0: [1022:14ea] type 00 class 0x060000
pci 0000:00:02.2: [1022:14ee] type 01 class 0x060400
pci 0000:00:02.2: PME# supported from D0 D3hot D3cold
pci 0000:00:02.4: [1022:14ee] type 01 class 0x060400
pci 0000:00:02.4: PME# supported from D0 D3hot D3cold
pci 0000:00:03.0: [1022:14ea] type 00 class 0x060000
pci 0000:00:03.1: [1022:14ef] type 01 class 0x060400
pci 0000:00:03.1: PME# supported from D0 D3hot D3cold
pci 0000:00:04.0: [1022:14ea] type 00 class 0x060000
pci 0000:00:04.1: [1022:14ef] type 01 class 0x060400
pci 0000:00:04.1: PME# supported from D0 D3hot D3cold
pci 0000:00:08.0: [1022:14ea] type 00 class 0x060000
pci 0000:00:08.1: [1022:14eb] type 01 class 0x060400
pci 0000:00:08.1: enabling Extended Tags
pci 0000:00:08.1: PME# supported from D0 D3hot D3cold
pci 0000:00:08.2: [1022:14eb] type 01 class 0x060400
pci 0000:00:08.2: enabling Extended Tags
pci 0000:00:08.2: PME# supported from D0 D3hot D3cold
pci 0000:00:08.3: [1022:14eb] type 01 class 0x060400
pci 0000:00:08.3: enabling Extended Tags
pci 0000:00:08.3: PME# supported from D0 D3hot D3cold
pci 0000:00:14.0: [1022:790b] type 00 class 0x0c0500
pci 0000:00:14.3: [1022:790e] type 00 class 0x060100
pci 0000:00:18.0: [1022:14f0] type 00 class 0x060000
pci 0000:00:18.1: [1022:14f1] type 00 class 0x060000
pci 0000:00:18.2: [1022:14f2] type 00 class 0x060000
pci 0000:00:18.3: [1022:14f3] type 00 class 0x060000
pci 0000:00:18.4: [1022:14f4] type 00 class 0x060000
pci 0000:00:18.5: [1022:14f5] type 00 class 0x060000
pci 0000:00:18.6: [1022:14f6] type 00 class 0x060000
pci 0000:00:18.7: [1022:14f7] type 00 class 0x060000
pci 0000:01:00.0: [14c3:0616] type 00 class 0x028000
pci 0000:01:00.0: reg 0x10: [mem 0x8810900000-0x88109fffff 64bit pref]
pci 0000:01:00.0: reg 0x18: [mem 0x90b00000-0x90b07fff 64bit]
pci 0000:01:00.0: PME# supported from D0 D3hot D3cold
pci 0000:00:02.2: PCI bridge to [bus 01]
pci 0000:00:02.2: bridge window [mem 0x90b00000-0x90bfffff]
pci 0000:00:02.2: bridge window [mem 0x8810900000-0x88109fffff 64bit pref]
pci 0000:02:00.0: [15b7:5030] type 00 class 0x010802
pci 0000:02:00.0: reg 0x10: [mem 0x90a00000-0x90a03fff 64bit]
pci 0000:00:02.4: PCI bridge to [bus 02]
pci 0000:00:02.4: bridge window [mem 0x90a00000-0x90afffff]
pci 0000:00:03.1: PCI bridge to [bus 03-61]
pci 0000:00:03.1: bridge window [io 0x6000-0x9fff]
pci 0000:00:03.1: bridge window [mem 0x78000000-0x8fffffff]
pci 0000:00:03.1: bridge window [mem 0x7800000000-0x87ffffffff 64bit pref]
pci 0000:00:04.1: PCI bridge to [bus 62-c0]
pci 0000:00:04.1: bridge window [io 0x2000-0x5fff]
pci 0000:00:04.1: bridge window [mem 0x60000000-0x77ffffff]
pci 0000:00:04.1: bridge window [mem 0x6800000000-0x77ffffffff 64bit pref]
pci 0000:c1:00.0: [1002:15bf] type 00 class 0x030000
pci 0000:c1:00.0: reg 0x10: [mem 0x8800000000-0x880fffffff 64bit pref]
pci 0000:c1:00.0: reg 0x18: [mem 0x90000000-0x901fffff 64bit pref]
pci 0000:c1:00.0: reg 0x20: [io 0x1000-0x10ff]
pci 0000:c1:00.0: reg 0x24: [mem 0x90500000-0x9057ffff]
pci 0000:c1:00.0: enabling Extended Tags
pci 0000:c1:00.0: BAR 0: assigned to efifb
pci 0000:c1:00.0: PME# supported from D1 D2 D3hot D3cold
pci 0000:c1:00.1: [1002:1640] type 00 class 0x040300
pci 0000:c1:00.1: reg 0x10: [mem 0x905c8000-0x905cbfff]
pci 0000:c1:00.1: enabling Extended Tags
pci 0000:c1:00.1: PME# supported from D1 D2 D3hot D3cold
pci 0000:c1:00.2: [1022:15c7] type 00 class 0x108000
pci 0000:c1:00.2: reg 0x18: [mem 0x90400000-0x904fffff]
pci 0000:c1:00.2: reg 0x24: [mem 0x905cc000-0x905cdfff]
pci 0000:c1:00.2: enabling Extended Tags
pci 0000:c1:00.3: [1022:15b9] type 00 class 0x0c0330
pci 0000:c1:00.3: reg 0x10: [mem 0x90200000-0x902fffff 64bit]
pci 0000:c1:00.3: enabling Extended Tags
pci 0000:c1:00.3: PME# supported from D0 D3hot D3cold
pci 0000:c1:00.4: [1022:15ba] type 00 class 0x0c0330
pci 0000:c1:00.4: reg 0x10: [mem 0x90300000-0x903fffff 64bit]
pci 0000:c1:00.4: enabling Extended Tags
pci 0000:c1:00.4: PME# supported from D0 D3hot D3cold
pci 0000:c1:00.5: [1022:15e2] type 00 class 0x048000
pci 0000:c1:00.5: reg 0x10: [mem 0x90580000-0x905bffff]
pci 0000:c1:00.5: reg 0x18: [mem 0x8810000000-0x88107fffff 64bit pref]
pci 0000:c1:00.5: enabling Extended Tags
pci 0000:c1:00.5: PME# supported from D0 D3hot D3cold
pci 0000:c1:00.6: [1022:15e3] type 00 class 0x040300
pci 0000:c1:00.6: reg 0x10: [mem 0x905c0000-0x905c7fff]
pci 0000:c1:00.6: enabling Extended Tags
pci 0000:c1:00.6: PME# supported from D0 D3hot D3cold
pci 0000:00:08.1: PCI bridge to [bus c1]
pci 0000:00:08.1: bridge window [io 0x1000-0x1fff]
pci 0000:00:08.1: bridge window [mem 0x90000000-0x905fffff]
pci 0000:00:08.1: bridge window [mem 0x8800000000-0x88107fffff 64bit pref]
pci 0000:c2:00.0: [1022:14ec] type 00 class 0x130000
pci 0000:c2:00.0: enabling Extended Tags
pci 0000:c2:00.0: PME# supported from D3hot D3cold
pci 0000:c2:00.1: [1022:1502] type 00 class 0x118000
pci 0000:c2:00.1: reg 0x10: [mem 0x90900000-0x9097ffff]
pci 0000:c2:00.1: reg 0x14: [mem 0x909c0000-0x909c1fff]
pci 0000:c2:00.1: reg 0x18: [mem 0x8810800000-0x881083ffff 64bit pref]
pci 0000:c2:00.1: reg 0x20: [mem 0x90980000-0x909bffff]
pci 0000:c2:00.1: enabling Extended Tags
pci 0000:00:08.2: PCI bridge to [bus c2]
pci 0000:00:08.2: bridge window [mem 0x90900000-0x909fffff]
pci 0000:00:08.2: bridge window [mem 0x8810800000-0x88108fffff 64bit pref]
pci 0000:c3:00.0: [1022:14ec] type 00 class 0x130000
pci 0000:c3:00.0: enabling Extended Tags
pci 0000:c3:00.3: [1022:15c0] type 00 class 0x0c0330
pci 0000:c3:00.3: reg 0x10: [mem 0x90600000-0x906fffff 64bit]
pci 0000:c3:00.3: enabling Extended Tags
pci 0000:c3:00.3: PME# supported from D0 D3hot D3cold
pci 0000:c3:00.4: [1022:15c1] type 00 class 0x0c0330
pci 0000:c3:00.4: reg 0x10: [mem 0x90700000-0x907fffff 64bit]
pci 0000:c3:00.4: enabling Extended Tags
pci 0000:c3:00.4: PME# supported from D0 D3hot D3cold
pci 0000:c3:00.5: [1022:1668] type 00 class 0x0c0340
pci 0000:c3:00.5: reg 0x10: [mem 0x90800000-0x9087ffff 64bit]
pci 0000:c3:00.5: Max Payload Size set to 128 (was 256, max 256)
pci 0000:c3:00.5: enabling Extended Tags
pci 0000:c3:00.5: PME# supported from D0 D3hot D3cold
pci 0000:c3:00.6: [1022:1669] type 00 class 0x0c0340
pci 0000:c3:00.6: reg 0x10: [mem 0x90880000-0x908fffff 64bit]
pci 0000:c3:00.6: Max Payload Size set to 128 (was 256, max 256)
pci 0000:c3:00.6: enabling Extended Tags
pci 0000:c3:00.6: PME# supported from D0 D3hot D3cold
pci 0000:00:08.3: PCI bridge to [bus c3]
pci 0000:00:08.3: bridge window [mem 0x90600000-0x908fffff]
ACPI: PCI: Interrupt link LNKA configured for IRQ 0
ACPI: PCI: Interrupt link LNKA disabled
ACPI: PCI: Interrupt link LNKB configured for IRQ 0
ACPI: PCI: Interrupt link LNKB disabled
ACPI: PCI: Interrupt link LNKC configured for IRQ 0
ACPI: PCI: Interrupt link LNKC disabled
ACPI: PCI: Interrupt link LNKD configured for IRQ 0
ACPI: PCI: Interrupt link LNKD disabled
ACPI: PCI: Interrupt link LNKE configured for IRQ 0
ACPI: PCI: Interrupt link LNKE disabled
ACPI: PCI: Interrupt link LNKF configured for IRQ 0
ACPI: PCI: Interrupt link LNKF disabled
ACPI: PCI: Interrupt link LNKG configured for IRQ 0
ACPI: PCI: Interrupt link LNKG disabled
ACPI: PCI: Interrupt link LNKH configured for IRQ 0
ACPI: PCI: Interrupt link LNKH disabled
Low-power S0 idle used by default for system suspend
ACPI: EC: interrupt unblocked
ACPI: EC: event unblocked
ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62
ACPI: EC: GPE=0xb
ACPI: \_SB_.PCI0.LPC0.EC0_: Boot DSDT EC initialization complete
ACPI: \_SB_.PCI0.LPC0.EC0_: EC: Used to handle transactions and events
iommu: Default domain type: Translated
iommu: DMA domain TLB invalidation policy: lazy mode
SCSI subsystem initialized
libata version 3.00 loaded.
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti
PTP clock support registered
EDAC MC: Ver: 3.0.0
efivars: Registered efivars operations
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
NetLabel: unlabeled traffic allowed by default
mctp: management component transport protocol core
NET: Registered PF_MCTP protocol family
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0009f000-0x0009ffff]
e820: reserve RAM buffer [mem 0x09b00000-0x0bffffff]
e820: reserve RAM buffer [mem 0x09f00000-0x0bffffff]
e820: reserve RAM buffer [mem 0x4049b018-0x43ffffff]
e820: reserve RAM buffer [mem 0x42360000-0x43ffffff]
e820: reserve RAM buffer [mem 0x44569000-0x47ffffff]
e820: reserve RAM buffer [mem 0x4456f000-0x47ffffff]
e820: reserve RAM buffer [mem 0x4b833000-0x4bffffff]
e820: reserve RAM buffer [mem 0x4d16b000-0x4fffffff]
e820: reserve RAM buffer [mem 0x5077f000-0x53ffffff]
e820: reserve RAM buffer [mem 0x5b000000-0x5bffffff]
e820: reserve RAM buffer [mem 0x107e300000-0x107fffffff]
pci 0000:c1:00.0: vgaarb: setting as boot VGA device
pci 0000:c1:00.0: vgaarb: bridge control possible
pci 0000:c1:00.0: vgaarb: VGA device added: decodes=io+mem,owns=none,locks=none
vgaarb: loaded
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
hpet0: 3 comparators, 32-bit 14.318180 MHz counter
clocksource: Switched to clocksource tsc-early
VFS: Disk quotas dquot_6.6.0
VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
pnp: PnP ACPI init
system 00:00: [mem 0xfec00000-0xfec01fff] could not be reserved
system 00:00: [mem 0xfee00000-0xfee00fff] has been reserved
system 00:02: [io 0x0400-0x04cf] has been reserved
system 00:02: [io 0x04d0-0x04d1] has been reserved
system 00:02: [io 0x04d6] has been reserved
system 00:02: [io 0x0c00-0x0c01] has been reserved
system 00:02: [io 0x0c14] has been reserved
system 00:02: [io 0x0c50-0x0c52] has been reserved
system 00:02: [io 0x0c6c] has been reserved
system 00:02: [io 0x0c6f] has been reserved
system 00:02: [io 0x0cd0-0x0cdb] has been reserved
system 00:03: [mem 0x000e0000-0x000fffff] could not be reserved
system 00:03: [mem 0xfe000000-0xffffffff] could not be reserved
pnp: PnP ACPI: found 5 devices
clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
NET: Registered PF_INET protocol family
IP idents hash table entries: 262144 (order: 9, 2097152 bytes, linear)
tcp_listen_portaddr_hash hash table entries: 32768 (order: 7, 524288 bytes, linear)
Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
TCP established hash table entries: 524288 (order: 10, 4194304 bytes, linear)
TCP bind hash table entries: 65536 (order: 9, 2097152 bytes, linear)
TCP: Hash tables configured (established 524288 bind 65536)
MPTCP token hash table entries: 65536 (order: 8, 1572864 bytes, linear)
UDP hash table entries: 32768 (order: 8, 1048576 bytes, linear)
UDP-Lite hash table entries: 32768 (order: 8, 1048576 bytes, linear)
NET: Registered PF_UNIX/PF_LOCAL protocol family
NET: Registered PF_XDP protocol family
pci 0000:00:02.2: PCI bridge to [bus 01]
pci 0000:00:02.2: bridge window [mem 0x90b00000-0x90bfffff]
pci 0000:00:02.2: bridge window [mem 0x8810900000-0x88109fffff 64bit pref]
pci 0000:00:02.4: PCI bridge to [bus 02]
pci 0000:00:02.4: bridge window [mem 0x90a00000-0x90afffff]
pci 0000:00:03.1: PCI bridge to [bus 03-61]
pci 0000:00:03.1: bridge window [io 0x6000-0x9fff]
pci 0000:00:03.1: bridge window [mem 0x78000000-0x8fffffff]
pci 0000:00:03.1: bridge window [mem 0x7800000000-0x87ffffffff 64bit pref]
pci 0000:00:04.1: PCI bridge to [bus 62-c0]
pci 0000:00:04.1: bridge window [io 0x2000-0x5fff]
pci 0000:00:04.1: bridge window [mem 0x60000000-0x77ffffff]
pci 0000:00:04.1: bridge window [mem 0x6800000000-0x77ffffffff 64bit pref]
pci 0000:00:08.1: PCI bridge to [bus c1]
pci 0000:00:08.1: bridge window [io 0x1000-0x1fff]
pci 0000:00:08.1: bridge window [mem 0x90000000-0x905fffff]
pci 0000:00:08.1: bridge window [mem 0x8800000000-0x88107fffff 64bit pref]
pci 0000:00:08.2: PCI bridge to [bus c2]
pci 0000:00:08.2: bridge window [mem 0x90900000-0x909fffff]
pci 0000:00:08.2: bridge window [mem 0x8810800000-0x88108fffff 64bit pref]
pci 0000:00:08.3: PCI bridge to [bus c3]
pci 0000:00:08.3: bridge window [mem 0x90600000-0x908fffff]
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000cffff window]
pci_bus 0000:00: resource 8 [mem 0x000d0000-0x000effff window]
pci_bus 0000:00: resource 9 [mem 0x60000000-0x90bfffff window]
pci_bus 0000:00: resource 10 [mem 0xf0000000-0xfec00000 window]
pci_bus 0000:00: resource 11 [mem 0xfed45000-0xfed814ff window]
pci_bus 0000:00: resource 12 [mem 0xfed81900-0xfed81fff window]
pci_bus 0000:00: resource 13 [mem 0xfedc0000-0xfedc0fff window]
pci_bus 0000:00: resource 14 [mem 0xfedc6000-0xfedc6fff window]
pci_bus 0000:00: resource 15 [mem 0x10c0200000-0x891fffffff window]
pci_bus 0000:01: resource 1 [mem 0x90b00000-0x90bfffff]
pci_bus 0000:01: resource 2 [mem 0x8810900000-0x88109fffff 64bit pref]
pci_bus 0000:02: resource 1 [mem 0x90a00000-0x90afffff]
pci_bus 0000:03: resource 0 [io 0x6000-0x9fff]
pci_bus 0000:03: resource 1 [mem 0x78000000-0x8fffffff]
pci_bus 0000:03: resource 2 [mem 0x7800000000-0x87ffffffff 64bit pref]
pci_bus 0000:62: resource 0 [io 0x2000-0x5fff]
pci_bus 0000:62: resource 1 [mem 0x60000000-0x77ffffff]
pci_bus 0000:62: resource 2 [mem 0x6800000000-0x77ffffffff 64bit pref]
pci_bus 0000:c1: resource 0 [io 0x1000-0x1fff]
pci_bus 0000:c1: resource 1 [mem 0x90000000-0x905fffff]
pci_bus 0000:c1: resource 2 [mem 0x8800000000-0x88107fffff 64bit pref]
pci_bus 0000:c2: resource 1 [mem 0x90900000-0x909fffff]
pci_bus 0000:c2: resource 2 [mem 0x8810800000-0x88108fffff 64bit pref]
pci_bus 0000:c3: resource 1 [mem 0x90600000-0x908fffff]
pci 0000:c1:00.1: D0 power state depends on 0000:c1:00.0
PCI: CLS 64 bytes, default 64
pci 0000:00:00.2: AMD-Vi: IOMMU performance counters supported
pci 0000:00:01.0: Adding to iommu group 0
Trying to unpack rootfs image as initramfs...
pci 0000:00:02.0: Adding to iommu group 1
pci 0000:00:02.2: Adding to iommu group 1
pci 0000:00:02.4: Adding to iommu group 1
pci 0000:00:03.0: Adding to iommu group 2
pci 0000:00:03.1: Adding to iommu group 2
pci 0000:00:04.0: Adding to iommu group 3
pci 0000:00:04.1: Adding to iommu group 3
pci 0000:00:08.0: Adding to iommu group 4
pci 0000:00:08.1: Adding to iommu group 4
pci 0000:00:08.2: Adding to iommu group 4
pci 0000:00:08.3: Adding to iommu group 4
pci 0000:00:14.0: Adding to iommu group 5
pci 0000:00:14.3: Adding to iommu group 5
pci 0000:00:18.0: Adding to iommu group 6
pci 0000:00:18.1: Adding to iommu group 6
pci 0000:00:18.2: Adding to iommu group 6
pci 0000:00:18.3: Adding to iommu group 6
pci 0000:00:18.4: Adding to iommu group 6
pci 0000:00:18.5: Adding to iommu group 6
pci 0000:00:18.6: Adding to iommu group 6
pci 0000:00:18.7: Adding to iommu group 6
pci 0000:01:00.0: Adding to iommu group 1
pci 0000:02:00.0: Adding to iommu group 1
pci 0000:c1:00.0: Adding to iommu group 4
pci 0000:c1:00.1: Adding to iommu group 4
pci 0000:c1:00.2: Adding to iommu group 4
pci 0000:c1:00.3: Adding to iommu group 4
pci 0000:c1:00.4: Adding to iommu group 4
pci 0000:c1:00.5: Adding to iommu group 4
pci 0000:c1:00.6: Adding to iommu group 4
pci 0000:c2:00.0: Adding to iommu group 4
pci 0000:c2:00.1: Adding to iommu group 4
pci 0000:c3:00.0: Adding to iommu group 4
pci 0000:c3:00.3: Adding to iommu group 4
pci 0000:c3:00.4: Adding to iommu group 4
pci 0000:c3:00.5: Adding to iommu group 4
pci 0000:c3:00.6: Adding to iommu group 4
pci 0000:00:00.2: can't derive routing for PCI INT A
pci 0000:00:00.2: PCI INT A: not connected
pci 0000:00:00.2: AMD-Vi: Found IOMMU cap 0x40
AMD-Vi: Extended features (0x246577efa2254afa, 0x0): PPR NX GT [5] IA GA PC GA_vAPIC
AMD-Vi: Interrupt remapping enabled
AMD-Vi: Virtual APIC enabled
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB: mapped [mem 0x0000000046c52000-0x000000004ac52000] (64MB)
LVT offset 0 assigned for vector 0x400
perf: AMD IBS detected (0x00000bff)
amd_uncore: 4 amd_df counters detected
amd_uncore: 6 amd_l3 counters detected
perf/amd_iommu: Detected AMD IOMMU #0 (2 banks, 4 counters/bank).
Initialise system trusted keyrings
Key type blacklist registered
workingset: timestamp_bits=36 max_order=24 bucket_order=0
zbud: loaded
integrity: Platform Keyring initialized
integrity: Machine keyring initialized
NET: Registered PF_ALG protocol family
xor: automatically using best checksumming function avx
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Freeing initrd memory: 54672K
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 245)
io scheduler mq-deadline registered
io scheduler kyber registered
io scheduler bfq registered
atomic64_test: passed for x86-64 platform with CX8 and with SSE
pcieport 0000:00:02.2: PME: Signaling with IRQ 38
pcieport 0000:00:02.4: PME: Signaling with IRQ 39
pcieport 0000:00:03.1: PME: Signaling with IRQ 40
pcieport 0000:00:03.1: pciehp: Slot #0 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl+ IbPresDis- LLActRep+
pcieport 0000:00:04.1: PME: Signaling with IRQ 41
pcieport 0000:00:04.1: pciehp: Slot #0 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl+ IbPresDis- LLActRep+
pcieport 0000:00:08.1: PME: Signaling with IRQ 42
pcieport 0000:00:08.2: PME: Signaling with IRQ 43
pcieport 0000:00:08.3: PME: Signaling with IRQ 44
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
ACPI: AC: AC Adapter [ACAD] (off-line)
input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:44/PNP0C09:00/PNP0C0D:00/input/input0
ACPI: button: Lid Switch [LID0]
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
ACPI: button: Power Button [PWRB]
Estimated ratio of average max frequency by base frequency (times 1024): 1548
Monitor-Mwait will be used to enter C-1 state
ACPI: \_SB_.PLTF.C000: Found 3 idle states
ACPI: \_SB_.PLTF.C001: Found 3 idle states
ACPI: \_SB_.PLTF.C002: Found 3 idle states
ACPI: \_SB_.PLTF.C003: Found 3 idle states
ACPI: \_SB_.PLTF.C004: Found 3 idle states
ACPI: \_SB_.PLTF.C005: Found 3 idle states
ACPI: \_SB_.PLTF.C006: Found 3 idle states
ACPI: \_SB_.PLTF.C007: Found 3 idle states
ACPI: \_SB_.PLTF.C008: Found 3 idle states
ACPI: \_SB_.PLTF.C009: Found 3 idle states
ACPI: \_SB_.PLTF.C00A: Found 3 idle states
ACPI: \_SB_.PLTF.C00B: Found 3 idle states
ACPI: \_SB_.PLTF.C00C: Found 3 idle states
ACPI: \_SB_.PLTF.C00D: Found 3 idle states
ACPI: \_SB_.PLTF.C00E: Found 3 idle states
ACPI: \_SB_.PLTF.C00F: Found 3 idle states
thermal LNXTHERM:00: registered as thermal_zone0
ACPI: thermal: Thermal Zone [TZ00] (25 C)
thermal LNXTHERM:01: registered as thermal_zone1
ACPI: thermal: Thermal Zone [TZ01] (27 C)
thermal LNXTHERM:02: registered as thermal_zone2
ACPI: thermal: Thermal Zone [TZ02] (26 C)
thermal LNXTHERM:03: registered as thermal_zone3
ACPI: thermal: Thermal Zone [TZ03] (35 C)
ACPI: battery: Slot [BAT1] (battery present)
Non-volatile memory driver v1.3
Linux agpgart interface v0.103
ACPI: bus type drm_connector registered
[drm] Initialized simpledrm 1.0.0 20200625 for simple-framebuffer.0 on minor 0
fbcon: Deferring console take-over
simple-framebuffer simple-framebuffer.0: [drm] fb0: simpledrmdrmfb frame buffer device
xhci_hcd 0000:c1:00.3: xHCI Host Controller
xhci_hcd 0000:c1:00.3: new USB bus registered, assigned bus number 1
xhci_hcd 0000:c1:00.3: hcc params 0x0128ffc5 hci version 0x120 quirks 0x0000000200000410
xhci_hcd 0000:c1:00.3: xHCI Host Controller
xhci_hcd 0000:c1:00.3: new USB bus registered, assigned bus number 2
xhci_hcd 0000:c1:00.3: Host supports USB 3.1 Enhanced SuperSpeed
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.05
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: xHCI Host Controller
usb usb1: Manufacturer: Linux 6.5.6-300.fc39.x86_64 xhci-hcd
usb usb1: SerialNumber: 0000:c1:00.3
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 5 ports detected
usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.05
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: xHCI Host Controller
usb usb2: Manufacturer: Linux 6.5.6-300.fc39.x86_64 xhci-hcd
usb usb2: SerialNumber: 0000:c1:00.3
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
xhci_hcd 0000:c1:00.4: xHCI Host Controller
xhci_hcd 0000:c1:00.4: new USB bus registered, assigned bus number 3
xhci_hcd 0000:c1:00.4: hcc params 0x0110ffc5 hci version 0x120 quirks 0x0000000200000410
xhci_hcd 0000:c1:00.4: xHCI Host Controller
xhci_hcd 0000:c1:00.4: new USB bus registered, assigned bus number 4
xhci_hcd 0000:c1:00.4: Host supports USB 3.1 Enhanced SuperSpeed
usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.05
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: xHCI Host Controller
usb usb3: Manufacturer: Linux 6.5.6-300.fc39.x86_64 xhci-hcd
usb usb3: SerialNumber: 0000:c1:00.4
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 1 port detected
usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.05
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: xHCI Host Controller
usb usb4: Manufacturer: Linux 6.5.6-300.fc39.x86_64 xhci-hcd
usb usb4: SerialNumber: 0000:c1:00.4
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 1 port detected
xhci_hcd 0000:c3:00.3: xHCI Host Controller
xhci_hcd 0000:c3:00.3: new USB bus registered, assigned bus number 5
xhci_hcd 0000:c3:00.3: hcc params 0x0110ffc5 hci version 0x120 quirks 0x0000000200000410
xhci_hcd 0000:c3:00.3: xHCI Host Controller
xhci_hcd 0000:c3:00.3: new USB bus registered, assigned bus number 6
xhci_hcd 0000:c3:00.3: Host supports USB 3.1 Enhanced SuperSpeed
usb usb5: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.05
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: xHCI Host Controller
usb usb5: Manufacturer: Linux 6.5.6-300.fc39.x86_64 xhci-hcd
usb usb5: SerialNumber: 0000:c3:00.3
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 1 port detected
usb usb6: We don't know the algorithms for LPM for this host, disabling LPM.
usb usb6: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.05
usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb6: Product: xHCI Host Controller
usb usb6: Manufacturer: Linux 6.5.6-300.fc39.x86_64 xhci-hcd
usb usb6: SerialNumber: 0000:c3:00.3
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 1 port detected
xhci_hcd 0000:c3:00.4: xHCI Host Controller
xhci_hcd 0000:c3:00.4: new USB bus registered, assigned bus number 7
xhci_hcd 0000:c3:00.4: hcc params 0x0110ffc5 hci version 0x120 quirks 0x0000000200000410
xhci_hcd 0000:c3:00.4: xHCI Host Controller
xhci_hcd 0000:c3:00.4: new USB bus registered, assigned bus number 8
xhci_hcd 0000:c3:00.4: Host supports USB 3.1 Enhanced SuperSpeed
usb usb7: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.05
usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb7: Product: xHCI Host Controller
usb usb7: Manufacturer: Linux 6.5.6-300.fc39.x86_64 xhci-hcd
usb usb7: SerialNumber: 0000:c3:00.4
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 1 port detected
usb usb8: We don't know the algorithms for LPM for this host, disabling LPM.
usb usb8: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.05
usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb8: Product: xHCI Host Controller
usb usb8: Manufacturer: Linux 6.5.6-300.fc39.x86_64 xhci-hcd
usb usb8: SerialNumber: 0000:c3:00.4
hub 8-0:1.0: USB hub found
hub 8-0:1.0: 1 port detected
usbcore: registered new interface driver usbserial_generic
i8042: PNP: PS/2 Controller [PNP0303:KBC0] at 0x60,0x64 irq 1
i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
i8042: Warning: Keylock active
serio: i8042 KBD port at 0x60,0x64 irq 1
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:01: RTC can wake from S4
rtc_cmos 00:01: registered as rtc0
rtc_cmos 00:01: setting system clock to 2023-11-02T05:58:47 UTC (1698904727)
rtc_cmos 00:01: alarms up to one month, 114 bytes nvram, hpet irqs
device-mapper: core: CONFIG_IMA_DISABLE_HTABLE is disabled. Duplicate IMA measurements will not be recorded in the IMA log.
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.48.0-ioctl (2023-03-01) initialised: dm-devel@redhat.com
hid: raw HID events driver (C) Jiri Kosina
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
drop_monitor: Initializing network drop monitor service
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2
Initializing XFRM netlink socket
NET: Registered PF_INET6 protocol family
Segment Routing with IPv6
RPL Segment Routing with IPv6
In-situ OAM (IOAM) with IPv6
mip6: Mobile IPv6
NET: Registered PF_PACKET protocol family
microcode: CPU11: patch_level=0x0a704103
microcode: CPU10: patch_level=0x0a704103
microcode: CPU1: patch_level=0x0a704103
microcode: CPU2: patch_level=0x0a704103
microcode: CPU3: patch_level=0x0a704103
microcode: CPU4: patch_level=0x0a704103
microcode: CPU5: patch_level=0x0a704103
microcode: CPU7: patch_level=0x0a704103
microcode: CPU6: patch_level=0x0a704103
microcode: CPU9: patch_level=0x0a704103
microcode: CPU8: patch_level=0x0a704103
microcode: CPU13: patch_level=0x0a704103
microcode: CPU12: patch_level=0x0a704103
microcode: CPU14: patch_level=0x0a704103
microcode: CPU15: patch_level=0x0a704103
microcode: CPU0: patch_level=0x0a704103
microcode: Microcode Update Driver: v2.2.
resctrl: L3 allocation detected
resctrl: MB allocation detected
resctrl: SMBA allocation detected
resctrl: L3 monitoring detected
IPI shorthand broadcast: enabled
AVX2 version of gcm_enc/dec engaged.
AES CTR mode by8 optimization enabled
sched_clock: Marking stable (706205797, 1400939)->(727666117, -20059381)
registered taskstats version 1
Loading compiled-in X.509 certificates
Loaded X.509 cert 'Fedora kernel signing key: 8096e35cbead41f260211fbb6aa9a067f06b8413'
page_owner is disabled
Key type .fscrypt registered
Key type fscrypt-provisioning registered
Btrfs loaded, zoned=yes, fsverity=yes
Key type big_key registered
Key type trusted registered
Key type encrypted registered
integrity: Loading X.509 certificate: UEFI:db
integrity: Loaded X.509 cert 'Microsoft Windows Production PCA 2011: a92902398e16c49778cd90f99e4f9ae17c55af53'
integrity: Loading X.509 certificate: UEFI:db
integrity: Loaded X.509 cert 'Microsoft Corporation UEFI CA 2011: 13adbf4309bd82709c8cd54f316ed522988a1bd4'
integrity: Loading X.509 certificate: UEFI:db
integrity: Loaded X.509 cert 'frame.work-LaptopAMDDB: 02'
Loading compiled-in module X.509 certificates
Loaded X.509 cert 'Fedora kernel signing key: 8096e35cbead41f260211fbb6aa9a067f06b8413'
ima: Allocated hash algorithm: sha256
ima: No architecture policies found
evm: Initialising EVM extended attributes:
evm: security.selinux
evm: security.SMACK64 (disabled)
evm: security.SMACK64EXEC (disabled)
evm: security.SMACK64TRANSMUTE (disabled)
evm: security.SMACK64MMAP (disabled)
evm: security.apparmor (disabled)
evm: security.ima
evm: security.capability
evm: HMAC attrs: 0x1
alg: No test for 842 (842-scomp)
alg: No test for 842 (842-generic)
PM: Magic number: 15:151:971
usb 3-1: new high-speed USB device number 2 using xhci_hcd
usb 1-4: new full-speed USB device number 2 using xhci_hcd
RAS: Correctable Errors collector initialized.
clk: Disabling unused clocks
Freeing unused decrypted memory: 2036K
Freeing unused kernel image (initmem) memory: 4508K
Write protecting the kernel read-only data: 34816k
Freeing unused kernel image (rodata/data gap) memory: 1948K
x86/mm: Checked W+X mappings: passed, no W+X pages found.
Run /init as init process
with arguments:
/init
rhgb
with environment:
HOME=/
TERM=linux
BOOT_IMAGE=(hd0,gpt2)/vmlinuz-6.5.6-300.fc39.x86_64
systemd[1]: systemd 254.5-2.fc39 running in system mode (+PAM +AUDIT +SELINUX -APPARMOR +IMA +SMACK +SECCOMP -GCRYPT +GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 -IDN -IPTC +KMOD +LIBCRYPTSETUP +LIBFDISK +PCRE2 +PWQUALITY +P11KIT +QRENCODE +TPM2 +BZIP2 +LZ4 +XZ +ZLIB +ZSTD +BPF_FRAMEWORK +XKBCOMMON +UTMP +SYSVINIT default-hierarchy=unified)
systemd[1]: Detected architecture x86-64.
systemd[1]: Running in initrd.
systemd[1]: No hostname configured, using default hostname.
systemd[1]: Hostname set to .
systemd[1]: bpf-lsm: LSM BPF program attached
usb 3-1: New USB device found, idVendor=0bda, idProduct=5634, bcdDevice= 0.21
usb 3-1: New USB device strings: Mfr=3, Product=1, SerialNumber=2
usb 3-1: Product: Laptop Camera
usb 3-1: Manufacturer: Generic
usb 3-1: SerialNumber: 200901010001
usb 1-4: New USB device found, idVendor=27c6, idProduct=609c, bcdDevice= 1.00
usb 1-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-4: Product: Goodix USB2.0 MISC
usb 1-4: Manufacturer: Goodix Technology Co., Ltd.
usb 1-4: SerialNumber: UIDXXXXXXXX_XXXX_MOC_B0
systemd[1]: Queued start job for default target initrd.target.
systemd[1]: Reached target initrd-usr-fs.target - Initrd /usr File System.
systemd[1]: Reached target slices.target - Slice Units.
systemd[1]: Reached target swap.target - Swaps.
systemd[1]: Reached target timers.target - Timer Units.
systemd[1]: Listening on dbus.socket - D-Bus System Message Bus Socket.
systemd[1]: Listening on systemd-journald-dev-log.socket - Journal Socket (/dev/log).
systemd[1]: Listening on systemd-journald.socket - Journal Socket.
systemd[1]: Listening on systemd-udevd-control.socket - udev Control Socket.
systemd[1]: Listening on systemd-udevd-kernel.socket - udev Kernel Socket.
systemd[1]: Reached target sockets.target - Socket Units.
systemd[1]: Starting kmod-static-nodes.service - Create List of Static Device Nodes...
systemd[1]: memstrack.service - Memstrack Anylazing Service was skipped because no trigger condition checks were met.
systemd[1]: Starting systemd-journald.service - Journal Service...
systemd[1]: Starting systemd-modules-load.service - Load Kernel Modules...
systemd[1]: Starting systemd-sysusers.service - Create System Users...
systemd[1]: Starting systemd-vconsole-setup.service - Virtual Console Setup...
systemd-journald[340]: Collecting audit messages is disabled.
systemd[1]: Finished kmod-static-nodes.service - Create List of Static Device Nodes.
fuse: init (API version 7.38)
systemd[1]: Finished systemd-sysusers.service - Create System Users.
systemd[1]: Finished systemd-modules-load.service - Load Kernel Modules.
systemd[1]: Finished systemd-vconsole-setup.service - Virtual Console Setup.
systemd[1]: Started systemd-journald.service - Journal Service.
usb 1-5: new high-speed USB device number 3 using xhci_hcd
usb 1-5: New USB device found, idVendor=0e8d, idProduct=e616, bcdDevice= 1.00
usb 1-5: New USB device strings: Mfr=5, Product=6, SerialNumber=7
usb 1-5: Product: Wireless_Device
usb 1-5: Manufacturer: MediaTek Inc.
usb 1-5: SerialNumber: 000000000
tsc: Refined TSC clocksource calibration: 3293.807 MHz
clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2f7a71b0f02, max_idle_ns: 440795209134 ns
clocksource: Switched to clocksource tsc
ccp 0000:c1:00.2: enabling device (0000 -> 0002)
sp5100_tco: SP5100/SB800 TCO WatchDog Timer Driver
sp5100-tco sp5100-tco: Using 0xfeb00000 for watchdog MMIO address
sp5100-tco sp5100-tco: initialized. heartbeat=60 sec (nowayout=0)
ccp 0000:c1:00.2: tee enabled
ccp 0000:c1:00.2: psp enabled
input: PIXA3854:00 093A:0274 Mouse as /devices/platform/AMDI0010:03/i2c-1/i2c-PIXA3854:00/0018:093A:0274.0001/input/input3
input: PIXA3854:00 093A:0274 Touchpad as /devices/platform/AMDI0010:03/i2c-1/i2c-PIXA3854:00/0018:093A:0274.0001/input/input4
hid-generic 0018:093A:0274.0001: input,hidraw0: I2C HID v1.00 Mouse [PIXA3854:00 093A:0274] on i2c-PIXA3854:00
input: FRMW0004:00 32AC:0006 Wireless Radio Control as /devices/platform/AMDI0010:00/i2c-0/i2c-FRMW0004:00/0018:32AC:0006.0002/input/input5
input: FRMW0004:00 32AC:0006 Consumer Control as /devices/platform/AMDI0010:00/i2c-0/i2c-FRMW0004:00/0018:32AC:0006.0002/input/input6
hid-generic 0018:32AC:001B.0003: hidraw1: I2C HID v1.00 Device [FRMW0005:00 32AC:001B] on i2c-FRMW0005:00
hid-generic 0018:32AC:0006.0002: input,hidraw0: I2C HID v1.00 Device [FRMW0004:00 32AC:0006] on i2c-FRMW0004:00
input: PIXA3854:00 093A:0274 Mouse as /devices/platform/AMDI0010:03/i2c-1/i2c-PIXA3854:00/0018:093A:0274.0001/input/input7
input: PIXA3854:00 093A:0274 Touchpad as /devices/platform/AMDI0010:03/i2c-1/i2c-PIXA3854:00/0018:093A:0274.0001/input/input8
hid-multitouch 0018:093A:0274.0001: input,hidraw1: I2C HID v1.00 Mouse [PIXA3854:00 093A:0274] on i2c-PIXA3854:00
ACPI: video: Video Device [VGA] (multi-head: yes rom: no post: no)
input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:16/LNXVIDEO:00/input/input9
nvme 0000:02:00.0: platform quirk: setting simple suspend
nvme nvme0: pci function 0000:02:00.0
nvme nvme0: 16/0/0 default/read/poll queues
nvme0n1: p1 p2 p3
AMD-Vi: AMD IOMMUv2 loaded and initialized
BTRFS: device label fedora devid 1 transid 373 /dev/nvme0n1p3 scanned by (udev-worker) (510)
[drm] amdgpu kernel modesetting enabled.
amdgpu: CRAT table disabled by module option
amdgpu: Virtual CRAT table created for CPU
amdgpu: Topology: Add CPU node
amdgpu 0000:c1:00.0: enabling device (0006 -> 0007)
[drm] initializing kernel modesetting (IP DISCOVERY 0x1002:0x15BF 0xF111:0x0006 0xC4).
[drm] register mmio base: 0x90500000
[drm] register mmio size: 524288
[drm] add ip block number 0
[drm] add ip block number 1
[drm] add ip block number 2
[drm] add ip block number 3
[drm] add ip block number 4
[drm] add ip block number 5
[drm] add ip block number 6
[drm] add ip block number 7
[drm] add ip block number 8
[drm] add ip block number 9
[drm] add ip block number 10
amdgpu 0000:c1:00.0: amdgpu: Fetched VBIOS from VFCT
amdgpu: ATOM BIOS: 113-PHXGENERIC-001
[drm] VCN(0) encode/decode are enabled in VM mode
amdgpu 0000:c1:00.0: [drm:jpeg_v4_0_early_init [amdgpu]] JPEG decode is enabled in VM mode
amdgpu 0000:c1:00.0: vgaarb: deactivate vga console
amdgpu 0000:c1:00.0: amdgpu: Trusted Memory Zone (TMZ) feature enabled
[drm] vm size is 262144 GB, 4 levels, block size is 9-bit, fragment size is 9-bit
amdgpu 0000:c1:00.0: amdgpu: VRAM: 512M 0x0000008000000000 - 0x000000801FFFFFFF (512M used)
amdgpu 0000:c1:00.0: amdgpu: GART: 512M 0x0000000000000000 - 0x000000001FFFFFFF
amdgpu 0000:c1:00.0: amdgpu: AGP: 267894784M 0x0000008400000000 - 0x0000FFFFFFFFFFFF
[drm] Detected VRAM RAM=512M, BAR=512M
[drm] RAM width 128bits DDR5
[drm] amdgpu: 512M of VRAM memory ready
[drm] amdgpu: 31734M of GTT memory ready.
[drm] GART: num cpu pages 131072, num gpu pages 131072
[drm] PCIE GART of 512M enabled (table at 0x000000801FD00000).
[drm] Loading DMUB firmware via PSP: version=0x08002300
[drm] Found VCN firmware Version ENC: 1.10 DEC: 5 VEP: 0 Revision: 0
amdgpu 0000:c1:00.0: amdgpu: Will use PSP to load VCN firmware
[drm] max_doorbell_slices=255
[drm] reserve 0x4000000 from 0x8018000000 for PSP TMR
amdgpu 0000:c1:00.0: amdgpu: RAS: optional ras ta ucode is not available
amdgpu 0000:c1:00.0: amdgpu: RAP: optional rap ta ucode is not available
amdgpu 0000:c1:00.0: amdgpu: SECUREDISPLAY: securedisplay ta ucode is not available
amdgpu 0000:c1:00.0: amdgpu: SMU is initialized successfully!
[drm] Display Core v3.2.241 initialized on DCN 3.1.4
[drm] DP-HDMI FRL PCON supported
[drm] DMUB hardware initialized: version=0x08002300
[drm] PSR support 1, DC PSR ver 0, sink PSR ver 3 DPCD caps 0x7b su_y_granularity 4
[drm] kiq ring mec 3 pipe 1 q 0
[drm] VCN decode and encode initialized successfully(under DPG Mode).
amdgpu 0000:c1:00.0: [drm:jpeg_v4_0_hw_init [amdgpu]] JPEG decode initialized successfully.
amdgpu: HMM registered 512MB device memory
kfd kfd: amdgpu: Allocated 3969056 bytes on gart
kfd kfd: amdgpu: Total number of KFD nodes to be created: 1
amdgpu: Virtual CRAT table created for GPU
amdgpu: Topology: Add dGPU node [0x15bf:0x1002]
kfd kfd: amdgpu: added device 1002:15bf
amdgpu 0000:c1:00.0: amdgpu: SE 1, SH per SE 2, CU per SH 6, active_cu_number 12
amdgpu 0000:c1:00.0: amdgpu: ring gfx_0.0.0 uses VM inv eng 0 on hub 0
amdgpu 0000:c1:00.0: amdgpu: ring comp_1.0.0 uses VM inv eng 1 on hub 0
amdgpu 0000:c1:00.0: amdgpu: ring comp_1.1.0 uses VM inv eng 4 on hub 0
amdgpu 0000:c1:00.0: amdgpu: ring comp_1.2.0 uses VM inv eng 6 on hub 0
amdgpu 0000:c1:00.0: amdgpu: ring comp_1.3.0 uses VM inv eng 7 on hub 0
amdgpu 0000:c1:00.0: amdgpu: ring comp_1.0.1 uses VM inv eng 8 on hub 0
amdgpu 0000:c1:00.0: amdgpu: ring comp_1.1.1 uses VM inv eng 9 on hub 0
amdgpu 0000:c1:00.0: amdgpu: ring comp_1.2.1 uses VM inv eng 10 on hub 0
amdgpu 0000:c1:00.0: amdgpu: ring comp_1.3.1 uses VM inv eng 11 on hub 0
amdgpu 0000:c1:00.0: amdgpu: ring sdma0 uses VM inv eng 12 on hub 0
amdgpu 0000:c1:00.0: amdgpu: ring vcn_unified_0 uses VM inv eng 0 on hub 8
amdgpu 0000:c1:00.0: amdgpu: ring jpeg_dec uses VM inv eng 1 on hub 8
amdgpu 0000:c1:00.0: amdgpu: ring mes_kiq_3.1.0 uses VM inv eng 13 on hub 0
[drm] ring gfx_32768.1.1 was added
[drm] ring compute_32768.2.2 was added
[drm] ring sdma_32768.3.3 was added
[drm] ring gfx_32768.1.1 ib test pass
[drm] ring compute_32768.2.2 ib test pass
[drm] ring sdma_32768.3.3 ib test pass
[drm] Initialized amdgpu 3.54.0 20150101 for 0000:c1:00.0 on minor 1
fbcon: amdgpudrmfb (fb0) is primary device
fbcon: Deferring console take-over
amdgpu 0000:c1:00.0: [drm] fb0: amdgpudrmfb frame buffer device
[drm] DSC precompute is not needed.
BTRFS info (device nvme0n1p3): using crc32c (crc32c-intel) checksum algorithm
BTRFS info (device nvme0n1p3): using free space tree
BTRFS info (device nvme0n1p3): enabling ssd optimizations
BTRFS info (device nvme0n1p3): auto enabling async discard
systemd-journald[340]: Received SIGTERM from PID 1 (systemd).
audit: type=1404 audit(1698904731.187:2): enforcing=1 old_enforcing=0 auid=4294967295 ses=4294967295 enabled=1 old-enabled=1 lsm=selinux res=1
SELinux: policy capability network_peer_controls=1
SELinux: policy capability open_perms=1
SELinux: policy capability extended_socket_class=1
SELinux: policy capability always_check_network=0
SELinux: policy capability cgroup_seclabel=1
SELinux: policy capability nnp_nosuid_transition=1
SELinux: policy capability genfs_seclabel_symlinks=1
SELinux: policy capability ioctl_skip_cloexec=0
audit: type=1403 audit(1698904731.281:3): auid=4294967295 ses=4294967295 lsm=selinux res=1
systemd[1]: Successfully loaded SELinux policy in 94.615ms.
systemd[1]: Relabeled /dev, /dev/shm, /run, /sys/fs/cgroup in 23.771ms.
systemd[1]: systemd 254.5-2.fc39 running in system mode (+PAM +AUDIT +SELINUX -APPARMOR +IMA +SMACK +SECCOMP -GCRYPT +GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 -IDN -IPTC +KMOD +LIBCRYPTSETUP +LIBFDISK +PCRE2 +PWQUALITY +P11KIT +QRENCODE +TPM2 +BZIP2 +LZ4 +XZ +ZLIB +ZSTD +BPF_FRAMEWORK +XKBCOMMON +UTMP +SYSVINIT default-hierarchy=unified)
systemd[1]: Detected architecture x86-64.
systemd[1]: bpf-lsm: LSM BPF program attached
zram: Added device: zram0
systemd[1]: initrd-switch-root.service: Deactivated successfully.
systemd[1]: Stopped initrd-switch-root.service - Switch Root.
systemd[1]: systemd-journald.service: Scheduled restart job, restart counter is at 1.
systemd[1]: Created slice machine.slice - Virtual Machine and Container Slice.
systemd[1]: Created slice system-akmods\x2dkeygen.slice - Slice /system/akmods-keygen.
systemd[1]: Created slice system-getty.slice - Slice /system/getty.
systemd[1]: Created slice system-systemd\x2dfsck.slice - Slice /system/systemd-fsck.
systemd[1]: Created slice system-systemd\x2dzram\x2dsetup.slice - Slice /system/systemd-zram-setup.
systemd[1]: Created slice user.slice - User and Session Slice.
systemd[1]: systemd-ask-password-console.path - Dispatch Password Requests to Console Directory Watch was skipped because of an unmet condition check (ConditionPathExists=!/run/plymouth/pid).
systemd[1]: Started systemd-ask-password-wall.path - Forward Password Requests to Wall Directory Watch.
systemd[1]: Set up automount proc-sys-fs-binfmt_misc.automount - Arbitrary Executable File Formats File System Automount Point.
systemd[1]: Reached target cryptsetup.target - Local Encrypted Volumes.
systemd[1]: Reached target getty.target - Login Prompts.
systemd[1]: Stopped target initrd-switch-root.target - Switch Root.
systemd[1]: Stopped target initrd-fs.target - Initrd File Systems.
systemd[1]: Stopped target initrd-root-fs.target - Initrd Root File System.
systemd[1]: Reached target integritysetup.target - Local Integrity Protected Volumes.
systemd[1]: Reached target slices.target - Slice Units.
systemd[1]: Reached target veritysetup.target - Local Verity Protected Volumes.
systemd[1]: Listening on dm-event.socket - Device-mapper event daemon FIFOs.
systemd[1]: Listening on lvm2-lvmpolld.socket - LVM2 poll daemon socket.
systemd[1]: Listening on systemd-coredump.socket - Process Core Dump Socket.
systemd[1]: Listening on systemd-initctl.socket - initctl Compatibility Named Pipe.
systemd[1]: Listening on systemd-journald-audit.socket - Journal Audit Socket.
systemd[1]: Listening on systemd-oomd.socket - Userspace Out-Of-Memory (OOM) Killer Socket.
systemd[1]: Listening on systemd-udevd-control.socket - udev Control Socket.
systemd[1]: Listening on systemd-udevd-kernel.socket - udev Kernel Socket.
systemd[1]: Listening on systemd-userdbd.socket - User Database Manager Socket.
systemd[1]: Mounting dev-hugepages.mount - Huge Pages File System...
systemd[1]: Mounting dev-mqueue.mount - POSIX Message Queue File System...
systemd[1]: Mounting sys-kernel-debug.mount - Kernel Debug File System...
systemd[1]: Mounting sys-kernel-tracing.mount - Kernel Trace File System...
systemd[1]: auth-rpcgss-module.service - Kernel Module supporting RPCSEC_GSS was skipped because of an unmet condition check (ConditionPathExists=/etc/krb5.keytab).
systemd[1]: iscsi-starter.service was skipped because of an unmet condition check (ConditionDirectoryNotEmpty=/var/lib/iscsi/nodes).
systemd[1]: Starting kmod-static-nodes.service - Create List of Static Device Nodes...
systemd[1]: Starting lvm2-monitor.service - Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling...
systemd[1]: Starting modprobe@configfs.service - Load Kernel Module configfs...
systemd[1]: Starting modprobe@dm_mod.service - Load Kernel Module dm_mod...
systemd[1]: Starting modprobe@drm.service - Load Kernel Module drm...
systemd[1]: Starting modprobe@efi_pstore.service - Load Kernel Module efi_pstore...
systemd[1]: Starting modprobe@fuse.service - Load Kernel Module fuse...
systemd[1]: Starting modprobe@loop.service - Load Kernel Module loop...
systemd[1]: plymouth-switch-root.service: Deactivated successfully.
loop: module loaded
systemd[1]: Stopped plymouth-switch-root.service - Plymouth switch root service.
systemd[1]: systemd-fsck-root.service: Deactivated successfully.
systemd[1]: Stopped systemd-fsck-root.service - File System Check on Root Device.
systemd[1]: Starting systemd-journald.service - Journal Service...
systemd[1]: Starting systemd-modules-load.service - Load Kernel Modules...
systemd[1]: Starting systemd-network-generator.service - Generate network units from Kernel command line...
systemd[1]: systemd-pcrmachine.service - TPM2 PCR Machine ID Measurement was skipped because of an unmet condition check (ConditionPathExists=/sys/firmware/efi/efivars/StubPcrKernelImage-4a67b082-0a4c-41cf-b6c7-440b29bb8c4f).
systemd[1]: Starting systemd-remount-fs.service - Remount Root and Kernel File Systems...
systemd[1]: Starting systemd-udev-trigger.service - Coldplug All udev Devices...
systemd-journald[745]: Collecting audit messages is enabled.
systemd[1]: Mounted dev-hugepages.mount - Huge Pages File System.
systemd[1]: Mounted dev-mqueue.mount - POSIX Message Queue File System.
systemd[1]: Mounted sys-kernel-debug.mount - Kernel Debug File System.
systemd[1]: Mounted sys-kernel-tracing.mount - Kernel Trace File System.
BTRFS info (device nvme0n1p3: state M): use zstd compression, level 1
mc: Linux media interface: v0.10
systemd[1]: Finished kmod-static-nodes.service - Create List of Static Device Nodes.
audit: type=1130 audit(1698904731.810:4): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=kmod-static-nodes comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
systemd[1]: Started systemd-journald.service - Journal Service.
audit: type=1130 audit(1698904731.811:5): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=systemd-journald comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
videodev: Linux video capture interface: v2.00
v4l2loopback: loading out-of-tree module taints kernel.
v4l2loopback: module verification failed: signature and/or required key missing - tainting kernel
v4l2loopback driver version 0.12.7 loaded
audit: type=1130 audit(1698904731.824:6): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=lvm2-monitor comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1130 audit(1698904731.840:7): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=modprobe@configfs comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1131 audit(1698904731.840:8): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=modprobe@configfs comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1130 audit(1698904731.856:9): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=modprobe@dm_mod comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1131 audit(1698904731.856:10): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=modprobe@dm_mod comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
systemd-journald[745]: Received client request to flush runtime journal.
systemd-journald[745]: /var/log/journal/2afb581d68a0456eaf74dab919b3568c/system.journal: Journal file uses a different sequence number ID, rotating.
systemd-journald[745]: Rotating system journal.
kauditd_printk_skb: 15 callbacks suppressed
audit: type=1130 audit(1698904732.093:26): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=systemd-journal-flush comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1130 audit(1698904732.110:27): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=systemd-tmpfiles-setup-dev comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1334 audit(1698904732.112:28): prog-id=54 op=LOAD
audit: type=1334 audit(1698904732.112:29): prog-id=55 op=LOAD
audit: type=1334 audit(1698904732.112:30): prog-id=26 op=UNLOAD
audit: type=1334 audit(1698904732.112:31): prog-id=27 op=UNLOAD
audit: type=1130 audit(1698904732.162:32): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=systemd-udevd comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
zram0: detected capacity change from 0 to 16777216
audit: type=1130 audit(1698904732.218:33): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=modprobe@configfs comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1131 audit(1698904732.218:34): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=modprobe@configfs comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
amd-pmf AMDI0102:00: registered PMF device successfully
piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0
piix4_smbus 0000:00:14.0: Using register 0x02 for SMBus port selection
piix4_smbus 0000:00:14.0: Auxiliary SMBus Host Controller at 0xb20
audit: type=1130 audit(1698904732.235:35): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=modprobe@fuse comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
input: PC Speaker as /devices/platform/pcspkr/input/input10
RAPL PMU: API unit is 2^-32 Joules, 1 fixed counters, 163840 ms ovfl timer
RAPL PMU: hw unit of domain package 2^-16 Joules
ACPI: bus type thunderbolt registered
Adding 8388604k swap on /dev/zram0. Priority:100 extents:1 across:8388604k SSDscFS
Bluetooth: Core ver 2.22
NET: Registered PF_BLUETOOTH protocol family
Bluetooth: HCI device and connection manager initialized
cros_ec_lpcs cros_ec_lpcs.0: EC ID not detected
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
cfg80211: Loading compiled-in X.509 certificates for regulatory database
Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
usb 3-1: Found UVC 1.00 device Laptop Camera (0bda:5634)
kvm_amd: TSC scaling supported
kvm_amd: Nested Virtualization enabled
kvm_amd: Nested Paging enabled
kvm_amd: Virtual VMLOAD VMSAVE supported
kvm_amd: Virtual GIF supported
kvm_amd: Virtual NMI enabled
kvm_amd: LBR virtualization supported
usbcore: registered new interface driver btusb
usbcore: registered new interface driver uvcvideo
snd_pci_ps 0000:c1:00.5: enabling device (0000 -> 0002)
MCE: In-kernel MCE decoding enabled.
intel_rapl_common: Found RAPL domain package
intel_rapl_common: Found RAPL domain core
snd_hda_intel 0000:c1:00.1: enabling device (0000 -> 0002)
snd_hda_intel 0000:c1:00.1: Handle vga_switcheroo audio client
snd_hda_intel 0000:c1:00.6: enabling device (0000 -> 0002)
snd_hda_intel 0000:c1:00.1: bound 0000:c1:00.0 (ops amdgpu_dm_audio_component_bind_ops [amdgpu])
input: HD-Audio Generic HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:08.1/0000:c1:00.1/sound/card0/input11
input: HD-Audio Generic HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:08.1/0000:c1:00.1/sound/card0/input12
input: HD-Audio Generic HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:08.1/0000:c1:00.1/sound/card0/input13
snd_hda_codec_realtek hdaudioC1D0: autoconfig for ALC295: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
snd_hda_codec_realtek hdaudioC1D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC1D0: hp_outs=1 (0x21/0x0/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC1D0: mono: mono_out=0x0
snd_hda_codec_realtek hdaudioC1D0: inputs:
snd_hda_codec_realtek hdaudioC1D0: Mic=0x12
EXT4-fs (nvme0n1p2): mounted filesystem 6c7c1eae-73b3-4ed7-960f-98ec23e559d7 r/w with ordered data mode. Quota mode: none.
mt7921e 0000:01:00.0: enabling device (0000 -> 0002)
mt7921e 0000:01:00.0: ASIC revision: 79220010
mt7921e 0000:01:00.0: HW/SW Version: 0x8a108a10, Build Time: 20230627143702a
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp-with-tls transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
mt7921e 0000:01:00.0: WM Firmware Version: ____000000, Build Time: 20230627143946
dbus-broker-lau[1052]: memfd_create() called without MFD_EXEC or MFD_NOEXEC_SEAL set
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: BNEP socket layer initialized
input: HD-Audio Generic Headphone as /devices/pci0000:00/0000:00:08.1/0000:c1:00.6/sound/card1/input14
NET: Registered PF_QIPCRTR protocol family
mt7921e 0000:01:00.0 wlp1s0: renamed from wlan0
Bluetooth: hci0: Device setup in 2230124 usecs
Bluetooth: hci0: HCI Enhanced Setup Synchronous Connection command is advertised, but not supported.
Bluetooth: hci0: AOSP extensions version v1.00
Bluetooth: hci0: AOSP quality report is supported
Bluetooth: MGMT ver 1.22
warning: `QSampleCache::L' uses wireless extensions which will stop working for Wi-Fi 7 hardware; use nl80211
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
wlp1s0: authenticate with 24:4b:fe:62:67:04
wlp1s0: send auth to 24:4b:fe:62:67:04 (try 1/3)
wlp1s0: send auth to 24:4b:fe:62:67:04 (try 2/3)
wlp1s0: send auth to 24:4b:fe:62:67:04 (try 3/3)
wlp1s0: authentication with 24:4b:fe:62:67:04 timed out
wlp1s0: authenticate with a8:5e:45:95:db:54
wlp1s0: send auth to a8:5e:45:95:db:54 (try 1/3)
wlp1s0: authenticate with a8:5e:45:95:db:54
wlp1s0: send auth to a8:5e:45:95:db:54 (try 1/3)
wlp1s0: authenticated
wlp1s0: associate with a8:5e:45:95:db:54 (try 1/3)
wlp1s0: RX AssocResp from a8:5e:45:95:db:54 (capab=0x1511 status=0 aid=1)
wlp1s0: associated
wlp1s0: Limiting TX power to 21 (24 - 3) dBm as advertised by a8:5e:45:95:db:54
systemd-journald[745]: /var/log/journal/2afb581d68a0456eaf74dab919b3568c/user-1000.journal: Journal file uses a different sequence number ID, rotating.
wlp1s0: disassociated from a8:5e:45:95:db:54 (Reason: 2=PREV_AUTH_NOT_VALID)
wlp1s0: authenticate with 24:4b:fe:62:67:04
wlp1s0: send auth to 24:4b:fe:62:67:04 (try 1/3)
wlp1s0: authenticate with 24:4b:fe:62:67:04
wlp1s0: send auth to 24:4b:fe:62:67:04 (try 1/3)
wlp1s0: authenticated
wlp1s0: associate with 24:4b:fe:62:67:04 (try 1/3)
wlp1s0: RX AssocResp from 24:4b:fe:62:67:04 (capab=0x1511 status=0 aid=3)
wlp1s0: associated
wlp1s0: Limiting TX power to 21 (24 - 3) dBm as advertised by 24:4b:fe:62:67:04
ucsi_acpi USBC000:00: ucsi_handle_connector_change: ACK failed (-110)
usb 1-4: reset full-speed USB device number 2 using xhci_hcd
i2c_designware AMDI0010:00: i2c_dw_handle_tx_abort: lost arbitration
usb 3-1: USB disconnect, device number 2
i2c_hid_acpi i2c-FRMW0005:00: i2c_hid_get_input: incomplete report (7/65535)
i2c_hid_acpi i2c-FRMW0005:00: i2c_hid_get_input: incomplete report (7/65535)
i2c_hid_acpi i2c-FRMW0005:00: i2c_hid_get_input: incomplete report (7/65535)
SELinux: Converting 551 SID table entries...
SELinux: policy capability network_peer_controls=1
SELinux: policy capability open_perms=1
SELinux: policy capability extended_socket_class=1
SELinux: policy capability always_check_network=0
SELinux: policy capability cgroup_seclabel=1
SELinux: policy capability nnp_nosuid_transition=1
SELinux: policy capability genfs_seclabel_symlinks=1
SELinux: policy capability ioctl_skip_cloexec=0
usb 1-4: reset full-speed USB device number 2 using xhci_hcd
SELinux: Converting 566 SID table entries...
SELinux: policy capability network_peer_controls=1
SELinux: policy capability open_perms=1
SELinux: policy capability extended_socket_class=1
SELinux: policy capability always_check_network=0
SELinux: policy capability cgroup_seclabel=1
SELinux: policy capability nnp_nosuid_transition=1
SELinux: policy capability genfs_seclabel_symlinks=1
SELinux: policy capability ioctl_skip_cloexec=0
i2c_designware AMDI0010:00: i2c_dw_handle_tx_abort: lost arbitration
usb 1-4: reset full-speed USB device number 2 using xhci_hcd
i2c_hid_acpi i2c-FRMW0005:00: i2c_hid_get_input: incomplete report (7/65535)
usb 1-4: reset full-speed USB device number 2 using xhci_hcd
i2c_hid_acpi i2c-FRMW0005:00: i2c_hid_get_input: incomplete report (7/65535)
i2c_hid_acpi i2c-FRMW0005:00: i2c_hid_get_input: incomplete report (7/65535)
i2c_designware AMDI0010:00: i2c_dw_handle_tx_abort: lost arbitration
usb 1-4: reset full-speed USB device number 2 using xhci_hcd
i2c_designware AMDI0010:00: i2c_dw_handle_tx_abort: lost arbitration
i2c_hid_acpi i2c-FRMW0005:00: i2c_hid_get_input: incomplete report (7/65535)
i2c_hid_acpi i2c-FRMW0005:00: i2c_hid_get_input: incomplete report (7/65535)
i2c_designware AMDI0010:00: i2c_dw_handle_tx_abort: lost arbitration
i2c_hid_acpi i2c-FRMW0005:00: i2c_hid_get_input: incomplete report (7/65535)
i2c_designware AMDI0010:00: i2c_dw_handle_tx_abort: lost arbitration
i2c_hid_acpi i2c-FRMW0005:00: i2c_hid_get_input: incomplete report (7/65535)
i2c_hid_acpi i2c-FRMW0005:00: i2c_hid_get_input: incomplete report (7/65535)
i2c_hid_acpi i2c-FRMW0005:00: i2c_hid_get_input: incomplete report (7/65535)
usb 1-4: reset full-speed USB device number 2 using xhci_hcd
i2c_designware AMDI0010:00: i2c_dw_handle_tx_abort: lost arbitration
i2c_designware AMDI0010:00: i2c_dw_handle_tx_abort: lost arbitration
i2c_designware AMDI0010:00: i2c_dw_handle_tx_abort: lost arbitration
ucsi_acpi USBC000:00: ucsi_handle_connector_change: ACK failed (-110)
ucsi_acpi USBC000:00: ucsi_handle_connector_change: ACK failed (-110)
wlp1s0: disconnect from AP 24:4b:fe:62:67:04 for new auth to a8:5e:45:95:db:54
wlp1s0: authenticate with a8:5e:45:95:db:54
wlp1s0: send auth to a8:5e:45:95:db:54 (try 1/3)
wlp1s0: authenticated
wlp1s0: associate with a8:5e:45:95:db:54 (try 1/3)
wlp1s0: RX ReassocResp from a8:5e:45:95:db:54 (capab=0x1511 status=0 aid=1)
wlp1s0: associated
wlp1s0: Limiting TX power to 21 (24 - 3) dBm as advertised by a8:5e:45:95:db:54
usb 1-4: reset full-speed USB device number 2 using xhci_hcd
i2c_hid_acpi i2c-FRMW0005:00: i2c_hid_get_input: incomplete report (7/65535)
i2c_hid_acpi i2c-FRMW0005:00: i2c_hid_get_input: incomplete report (7/65535)
i2c_hid_acpi i2c-FRMW0005:00: i2c_hid_get_input: incomplete report (7/65535)
usb 1-4: reset full-speed USB device number 2 using xhci_hcd
i2c_hid_acpi i2c-FRMW0005:00: i2c_hid_get_input: incomplete report (7/65535)
i2c_hid_acpi i2c-FRMW0005:00: i2c_hid_get_input: incomplete report (7/65535)
i2c_hid_acpi i2c-FRMW0005:00: i2c_hid_get_input: incomplete report (7/65535)
i2c_designware AMDI0010:00: i2c_dw_handle_tx_abort: lost arbitration
i2c_hid_acpi i2c-FRMW0005:00: i2c_hid_get_input: incomplete report (7/65535)
ucsi_acpi USBC000:00: ucsi_handle_connector_change: ACK failed (-110)
wlp1s0: disassociated from a8:5e:45:95:db:54 (Reason: 2=PREV_AUTH_NOT_VALID)
wlp1s0: authenticate with 24:4b:fe:62:67:04
wlp1s0: send auth to 24:4b:fe:62:67:04 (try 1/3)
wlp1s0: authenticated
wlp1s0: associate with 24:4b:fe:62:67:04 (try 1/3)
wlp1s0: RX AssocResp from 24:4b:fe:62:67:04 (capab=0x1511 status=0 aid=3)
wlp1s0: associated
wlp1s0: Limiting TX power to 21 (24 - 3) dBm as advertised by 24:4b:fe:62:67:04
i2c_designware AMDI0010:00: i2c_dw_handle_tx_abort: lost arbitration
i2c_hid_acpi i2c-FRMW0005:00: i2c_hid_get_input: incomplete report (7/65535)
i2c_designware AMDI0010:00: i2c_dw_handle_tx_abort: lost arbitration
i2c_designware AMDI0010:00: i2c_dw_handle_tx_abort: lost arbitration
usb 1-4: reset full-speed USB device number 2 using xhci_hcd
i2c_designware AMDI0010:00: i2c_dw_handle_tx_abort: lost arbitration
i2c_hid_acpi i2c-FRMW0005:00: i2c_hid_get_input: incomplete report (7/65535)
i2c_hid_acpi i2c-FRMW0005:00: i2c_hid_get_input: incomplete report (7/65535)
i2c_designware AMDI0010:00: i2c_dw_handle_tx_abort: lost arbitration
usb 1-4: reset full-speed USB device number 2 using xhci_hcd
systemd[1]: systemd 254.5-2.fc39 running in system mode (+PAM +AUDIT +SELINUX -APPARMOR +IMA +SMACK +SECCOMP -GCRYPT +GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 -IDN -IPTC +KMOD +LIBCRYPTSETUP +LIBFDISK +PCRE2 +PWQUALITY +P11KIT +QRENCODE +TPM2 +BZIP2 +LZ4 +XZ +ZLIB +ZSTD +BPF_FRAMEWORK +XKBCOMMON +UTMP +SYSVINIT default-hierarchy=unified)
systemd[1]: Detected architecture x86-64.
systemd[1]: bpf-lsm: LSM BPF program attached
FS-Cache: Loaded
Key type dns_resolver registered
NFS: Registering the id_resolver key type
Key type id_resolver registered
Key type id_legacy registered
ucsi_acpi USBC000:00: ucsi_handle_connector_change: GET_CONNECTOR_STATUS failed (-5)
usb 1-4: reset full-speed USB device number 2 using xhci_hcd
wlp1s0: disconnect from AP 24:4b:fe:62:67:04 for new auth to a8:5e:45:95:db:54
wlp1s0: authenticate with a8:5e:45:95:db:54
wlp1s0: send auth to a8:5e:45:95:db:54 (try 1/3)
wlp1s0: authenticated
wlp1s0: associate with a8:5e:45:95:db:54 (try 1/3)
wlp1s0: RX ReassocResp from a8:5e:45:95:db:54 (capab=0x1511 status=0 aid=2)
wlp1s0: associated
wlp1s0: Limiting TX power to 21 (24 - 3) dBm as advertised by a8:5e:45:95:db:54
wlp1s0: disconnect from AP a8:5e:45:95:db:54 for new auth to 24:4b:fe:62:67:04
wlp1s0: authenticate with 24:4b:fe:62:67:04
wlp1s0: send auth to 24:4b:fe:62:67:04 (try 1/3)
wlp1s0: authenticated
wlp1s0: associate with 24:4b:fe:62:67:04 (try 1/3)
wlp1s0: RX ReassocResp from 24:4b:fe:62:67:04 (capab=0x1511 status=0 aid=3)
wlp1s0: associated
wlp1s0: Limiting TX power to 21 (24 - 3) dBm as advertised by 24:4b:fe:62:67:04
wlp1s0: disconnect from AP 24:4b:fe:62:67:04 for new auth to a8:5e:45:95:db:54
wlp1s0: authenticate with a8:5e:45:95:db:54
wlp1s0: send auth to a8:5e:45:95:db:54 (try 1/3)
wlp1s0: authenticated
wlp1s0: associate with a8:5e:45:95:db:54 (try 1/3)
wlp1s0: RX ReassocResp from a8:5e:45:95:db:54 (capab=0x1511 status=0 aid=2)
wlp1s0: associated
wlp1s0: Limiting TX power to 21 (24 - 3) dBm as advertised by a8:5e:45:95:db:54